| 2 x | Fibre-Cut Discs |
| 1 x | HSS drill bits 0.8mm |
| 1 x | Drill chuck with sliding sleeve for the tailstock |
| 1 x | Felt polishers |
| 1 x | Felt polishers |
| 3 x | Fixed Steady |
| 1 x | Sanding Drums |
| 1 x | Fine dust paper filter for CW-matic |
| 1 x | Sanding Discs |
| 3 x | Insulation Resistance Tester MG125 |
| 1 x | Tungsten carbide drills Ø1,5mm |
| 1 x | Three piece thread cutting set |
| 1 x | High quality corundum grinding bits |
| 1 x | Felt polishers |
| 1 x | Diamond Twist Drills |
| 1 x | HSS drill bits 0.5mm |
| 1 x | Nylon Fleece Brushes |
| 1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
| 1 x | HSS drill bits 1.2mm |
| 2 x | Fibre-Cut Discs |
| 1 x | High quality corundum grinding bits |
| 2 x | Felt cloth polishing disc (100 x 15mm) |
| 2 x | Fibre-Cut Discs |
| 1 x | HSS drill bits 1.0mm |
| 1 x | Tungsten carbide drills Ø1mm |
| 1 x | Fibre-Cut Discs |
| 1 x | Metal Cutting Blades |
| 1 x | Fibre-Cut Discs |
| 1 x | HSS drill bits 1.6mm |
| 1 x | Tungsten carbide drills Ø2mm |
| 1 x | Screwdriver bit set. 49-piece. |
| 1 x | Sanding Drums |
| 1 x | Felt polishers |
| 2 x | Five piece HSS chisel set |
| 2 x | Engraving tool GG |
| 1 x | Edge cutter with pin 6.4mm |
| 2 x | Fibre-Cut Discs |
| 2 x | Hot wire cutter THERMOCUT 12/E |
| 1 x | Flame shaped milling cutters |
| 1 x | Sanding bands 14x13mm |
| 2 x | 10-piece wood router cutter set |
| 3 x | Super-fine sanding discs grain 000 |
| 2 x | Replacement belts for BSL 220/E |
| 2 x | Angle polisher WP/E |
| 1 x | Flexible silicon discs |
| 6 x | Backing disc for LWS |
| 1 x | Replacement cutting disc for MICRO cutter MIC |
| 2 x | Blade for Steel and brass |
| 3 x | Bench drill press TBH |
| 3 x | Super-fine sanding discs grain 400 |
| 3 x | Corundum bound cutting disc for LWS |
| 2 x | Professional set for finish grinding and polishing |
| 2 x | Belt sander BS/E |
| 1 x | Super-Cut |
| 2 x | Professional polishing sponge |
| 3 x | Lambswool polishing disc |
| 2 x | Belt sander BBS/S |
| 1 x | Flexible silicon discs |
| 4 x | Bench Circular Saw KS 230 |
| 2 x | Angle cutter 45 ° |
| 3 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
| 1 x | Flap Wheels |
| 2 x | Bench drill machine TBM 220 |
| 3 x | 14-piece parallel supports set |
| 1 x | Diamond Cutting Discs |
| 1 x | Cutting disc, with reinforcement |
| 1 x | Tungsten Carbide Tipped (TCT) |
| 1 x | HSS cutting blade for OZI |
| 2 x | Replacement belts for BSL 220/E |
| 1 x | Flexible silicon discs |
| 4 x | Aluminium Die-Cast |
| 2 x | Microfibre cloth |
| 1 x | Diamond cutting blade for OZI |
| 2 x | Precision steel vice PM 40 |
| 3 x | Dividing attachment TA 230 for PF 250 |
| 2 x | MICROMOT steel collet set |
| 2 x | Machine Vice MS 4 |
| 1 x | |
| 3 x | Step clamps made of steel |
| 1 x | Hot wire cutter THERMOCUT 650 |
| 3 x | Tungsten carbide cutters set |
| 3 x | Chuck for TBM 220 |
| 2 x | MICROMOT drill stand MB 200 |
| 2 x | Protective device for hand-operated MICROMOT |
| 2 x | Flexishaft MICROMOT 110/P |
| 1 x | Ball-shaped diamond coated 3.2mm |
| 2 x | Mill/Drill Unit BFB 2000. |
| 2 x | MICROMOT tool holder |
| 3 x | Three-jaw steel drill chuck |
| 1 x | Polishing felt, medium hard |
| 2 x | Flexishaft MICROMOT 110/BF |
| 2 x | Replacement belts for BSL 220/E |
| 1 x | Flap Wheels |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Micro Compound Table KT 70 |
| 1 x | High quality corundum grinding bits |
| 1 x | Footswitch FS |
| 1 x | High quality corundum grinding bits |
| 1 x | Compact workshop vacuum cleaner CW-matic |
| 1 x | Router base OFV |
| 3 x | Special Fused Alumina (Hardness N). |
| 1 x | Three jaw chuck for the lathe DB 250 |
| 1 x | Milling cutter set (6 - 10mm) |
| 1 x | HSS twist drill set with centring pin |
| 1 x | Pensander PS 13 |
| 1 x | Milling cutter set (2 - 5mm) |
| 1 x | Microfibre polishing wheel, 15-ply (100mm) |
| 1 x | High quality corundum grinding bits |
| 1 x | High quality corundum grinding bits |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Universal and oil siphoning pump AP 12 |
| 1 x | MICROMOT extension cord. 300cm. |
| 1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
| 1 x | Replacement carving blades for MSG |
| 1 x | HSS boring tool set, 6 pieces |
| 1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Independent four jaw chuck for the DB 250 |
| 1 x | Flexible polishing pad set |
| 1 x | Flexible polishing pad set |
| 2 x | Diamond-coated cutting and roughing disc |
| 2 x | Corundum sanding discs for LWS |
| 2 x | Corundum fan sander for LWS |
| 2 x | Radius Cutting Attachment, complete with pointed tool |
| 2 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 2 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 2 x | Corundum grinding disc for LWS |
| 2 x | Gear Chuck |
| 2 x | Corundum grinding disc for LWS |
| 2 x | MICRO shaper MP 400 |
| 1 x | Cut off/mitre saw KGS 80 |
| 2 x | Table Saw FET |
| 1 x | Polishing Set |
| 1 x | Corundum sanding discs for LWS |
| 2 x | Super jig saw STS/E |
| 1 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 2 x | MICRO woodturning lathe DB 250 |
| 1 x | MICROMOT Mains Adapter NG 2/E |
| 2 x | Scroll saw DS 230/E |
| 2 x | 2-speed scroll saw DSH |
| 1 x | MICROMOT Mains Adapter NG 2/S |
| 1 x | Sanding fleece for LWS |
| 1 x | Tungstein carbide rasp - and cutting disc |
| 2 x | Motor-driven carving device MSG |
| 2 x | Thicknesser DH 40 |
| 2 x | MICRO Band Saw MBS 240/E |
| 1 x | Sanding fleece for LWS |
| 1 x | Surface planer AH 80 |
 |
| €12,957.19 |
