| 2 x | Cylinder shaped milling cutters |
| 2 x | Felt polishers |
| 1 x | Flexible silicon discs |
| 2 x | Polishing paste |
| 1 x | Cylindrical cutters |
| 1 x | High quality corundum grinding bits |
| 1 x | Disc cutters |
| 1 x | Set of precision cutters |
| 1 x | Wolfram vanadium steel milling bits |
| 2 x | High quality corundum grinding bits |
| 1 x | Solid carbide stylus for engraving |
| 3 x | Cotton polishers |
| 2 x | Cotton polishers |
| 2 x | Ball shaped milling cutters |
| 1 x | Felt polishers |
| 1 x | Cone shaped milling cutter |
| 2 x | Flexible polishing pad set |
| 1 x | Flexible silicon discs |
| 3 x | High quality corundum grinding bits |
| 2 x | High quality corundum grinding bits |
| 2 x | Tungsten carbide cutters set |
| 3 x | Cotton polishers |
| 1 x | Tungsten carbide cutter 2.0mm |
| 3 x | High quality corundum grinding bits |
| 1 x | Flame shaped milling cutters |
| 3 x | High quality corundum grinding bits |
| 1 x | Tungsten carbide cutter 3.0mm |
| 1 x | HSS drill bits 0.8mm |
| 1 x | Metal Cutting Blades |
| 5 x | Diamond Cutting Discs |
| 1 x | HSS twist drill set to DIN 338 |
| 2 x | Fibre-Cut Discs |
| 1 x | Tungsten carbide drills Ø1,5mm |
| 2 x | Fibre-Cut Discs |
| 2 x | Fibre-Cut Discs |
| 2 x | Fibre-Cut Discs |
| 3 x | Diamond Cutting Discs |
| 1 x | Tungsten carbide drills Ø1mm |
| 2 x | Fibre-Cut Discs |
| 5 x | Diamond Cutting Discs |
| 1 x | Fibre-Cut Discs |
| 1 x | HSS drill bits 1.6mm |
| 1 x | Tungsten carbide drills Ø2mm |
| 1 x | Diamond Cutting Discs |
| 3 x | Conjunto de três brocas de ponto |
| 1 x | HSS drill bits 0.5mm |
| 2 x | HSS twist drill set with centring pin |
| 1 x | HSS drill bits 1.0mm |
| 2 x | Ball-shaped diamond coated 1.2mm |
| 1 x | Rebating cutter 6.4mm |
| 1 x | Half round cutter 13mm |
| 1 x | Slot cutter 5.0mm |
| 1 x | Combi cutter 6.5/2.5mm |
| 1 x | Diamond Grinding Bits 1mm |
| 1 x | Rounding over cutter 6.4mm |
| 2 x | Steel cups |
| 1 x | Slot cutter 6.5mm |
| 2 x | Ball-shaped diamond coated 2.2mm |
| 1 x | Slot cutter 3.2mm |
| 2 x | Angle cutter 45 ° |
| 2 x | Wheels brushes |
| 2 x | Stainless steel brushes |
| 2 x | Steel wheels |
| 1 x | Diamond Grinding Bits 5mm |
| 2 x | Stainless steel cups |
| 1 x | Edge cutter with pin 6.4mm |
| 1 x | V-slot cutter 6.5mm |
| 2 x | Stainless steel wheels |
| 1 x | 10-piece wood router cutter set |
| 2 x | Ball-shaped diamond coated 3.2mm |
| 2 x | Core box bit 3.2mm |
| 1 x | Diamond Grinding Bits 1,8mm |
| 3 x | Precision steel vice PM 40 |
| 2 x | Cutting tools of high quality cobalt HSS steel, ground |
| 3 x | TIP SPT-6 |
| 2 x | Cups brushes |
| 1 x | Crosscut 'Super-Cut' blade |
| 2 x | Corundum grinding disc for LWS |
| 3 x | Corundum fan sander for LWS |
| 2 x | Cutting tools of high quality cobalt HSS steel, ground |
| 2 x | Cutting disc, with reinforcement |
| 3 x | Corundum sanding discs for LWS |
| 3 x | Hot wire cutter THERMOCUT 230/E |
| 2 x | Corundum fan sander for LWS |
| 2 x | Corundum grinding disc for LWS |
| 3 x | Corundum sanding discs for LWS |
| 1 x | Cut off/mitre saw KGS 80 |
| 2 x | 6-piece screwdriver and cross-recess set |
| 4 x | Hot wire cutter THERMOCUT 650 |
| 1 x | HSS boring tool set, 6 pieces |
| 1 x | Flexible polishing pad set |
| 3 x | Multipurpose Vices Primus 75 |
| 1 x | Milling cutter set (6 - 10mm) |
| 1 x | Milling cutter set (2 - 5mm) |
| 2 x | TIP SPT-10 |
| 2 x | MICROMOT steel collet set |
| 2 x | High quality corundum grinding bits |
| 2 x | Replacement carving blades for MSG |
| 2 x | Precision Vice FMZ |
| 2 x | Multipurpose Vices Primus100 |
| 1 x | Bench drill press TBH |
| 2 x | Aluminium Die-Cast |
| 2 x | 6-piece TORX-screwdriver-set |
| 3 x | TORQUE-SCREWDRIVER 1.5 - 4.0 Nm |
| 1 x | Bench Circular Saw KS 230 |
| 1 x | Blade for Steel and brass |
| 2 x | 14-piece parallel supports set |
| 2 x | 6-piece screwdriver and cross-recess set |
| 2 x | 6-piece screwdriver and cross-recess set |
| 1 x | Bench drill machine TBM 220 |
| 2 x | Backing disc for LWS |
| 1 x | 2-speed scroll saw DSH |
| 1 x | Diamond-coated cutting disc for MIC |
| 1 x | Antiallergical Tweezers 5-121-1 |
| 1 x | Brass contact cleaner brush |
| 2 x | Broca de alta duração de 2.2mm |
| 1 x | Antiallergical Tweezers 5-107-1 |
| 1 x | Thicknesser DH 40 |
| 1 x | Diamond Coated |
| 1 x | Professional set for finish grinding and polishing |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Broca de alta duração de 2.7mm |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
| 1 x | TIP SPT-9 |
| 2 x | Broca de alta duração de 2.4mm |
| 2 x | Machine Vice MS 4 |
| 1 x | Broca de alta duração de 3.0mm |
| 1 x | Precision Vice FMS 75 |
| 1 x | ACCENT SERVICE TOOLS SET |
| 1 x | Ceramic tweezers 5-081 |
| 1 x | Polishing Set |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Antiallergical Tweezers 5-155-1 |
| 1 x | POLISHER 200ml |
| 1 x | Self-adhesive silicone film for easy sanding disc replacement |
| 1 x | Antiallergical Tweezers 5-117-1 |
| 1 x | Broca de alta duração de 2.8mm |
| 1 x | Super safety and specialty bit set, 75-piece |
| 2 x | 6pcs Double Open End wrench set |
| 2 x | Broca de alta duração de 2.6mm |
| 1 x | 6-piece screwdriver set ESD |
| 1 x | 6-piece socket wrenches ESD |
| 1 x | TIP SPT-4 |
| 1 x | 6-piece screwdriver and cross-recess set ESD |
| 1 x | 6-piece wrench key set ESD |
| 1 x | TIP SPT-3 |
| 1 x | Antiallergical Tweezers 5-125-1 |
| 1 x | 6-piece TORX-screwdriver-set ESD |
| 1 x | 6-piece set of ESD/EGB tweezers |
| 1 x | Hot wire cutter THERMOCUT 12/E |
| 3 x | Warding files set, 6pcs |
| 3 x | Pinça SOIC de 8 pinos |
| 1 x | Lathe tools 8mm pastilhados |
| 1 x | OPTI BF20L VARIO |
| 2 x | TORQUE-SCREWDRIVER 0.5 - 1.5 Nm |
| 1 x | Safety Insulated Phillips Screwdriver 14-631VDE |
| 1 x | Handy 1515 |
| 2 x | Glass fibre contact cleaner brush |
| 1 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
| 1 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 1 x | Broca de ponto 3.15 x 1.25 |
| 3 x | IC Test clip 20 pins |
| 1 x | Insulation Resistance Tester MG125 |
| 1 x | lathe tools 10mm |
| 1 x | Insert CCGT060202-AK |
| 1 x | Multiform grindstone |
| 2 x | sanding belts for BBS/s Grit 150 |
| 1 x | Insert CCGT120404-AK |
| 1 x | SmartProg2 |
| 1 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 1 x | SCLCR1010E06 |
| 2 x | Three-jaw steel drill chuck |
| 1 x | sclcr2525M12 |
| 1 x | BGA-Bottom-11 |
| 1 x | centrically clamping 100mm |
| 1 x | Cutter head for copy and surface milling MT2 |
| 2 x | Digital caliper gauge 300 mm |
| 1 x | Centre Turning Attachment |
| 2 x | MICRO Miller FF 230 |
| 1 x | Four Jaw Chuck |
| 1 x | Safety Insulated Pozidriv Screwdriver 14-644VDE |
| 1 x | Blade holders for DS 460 |
| 1 x | End milling cutter kit HSS 12 pcs |
| 1 x | Cutting tool HM 20 mm |
| 1 x | 3-jaw chuck centrically clamping 160mm |
| 1 x | Sanding bands 14x13mm |
| 1 x | Diamond cutting blade for OZI |
| 1 x | Collet Set for accurate use on round components |
| 1 x | BeeHive204 |
| 1 x | Tool holder for rotary tools |
| 1 x | BGA-0246/0244 |
| 1 x | BGA-Bottom-105 |
| 2 x | MICRO Miller FF 500 |
| 1 x | Sanding pads for OZI 220/E grit 150 |
| 1 x | BGA-Bottom-118 |
| 1 x | Sanding bands 14x13mm |
| 1 x | Radius Cutting Attachment, complete with pointed tool |
| 1 x | Band knife of hardened spring band steel (without teeth) |
| 1 x | Gear Chuck |
| 1 x | DCMT070204 |
| 1 x | CM2 - B16 - M10 |
| 1 x | Compact workshop vacuum cleaner CW-matic |
| 1 x | BGA-Bottom-111 |
| 1 x | BGA-Bottom-10 |
| 1 x | BGA-Bottom-101 |
| 1 x | 3-jaw chuck centrically clamping 125mm |
| 3 x | Table Saw TKS 2500 SC |
| 1 x | Glass fibre contact cleaner brush |
| 1 x | centrically clamping 125mm |
| 1 x | BGA-Bottom-125 |
| 1 x | 4-jaw chuck individually clamping 80mm |
| 1 x | Fixed Steady |
| 1 x | VIDEOCLEAN 200ml |
| 1 x | BGA-Bottom-108 |
| 1 x | 3-jaw chuck centrically clamping 80mm |
| 1 x | BGA-Bottom-106 |
| 1 x | BGA-Bottom-103 |
| 1 x | Cutting tool 16 mm |
| 1 x | BGA-Bottom-1 |
| 1 x | Brass brushes |
| 1 x | BGA-0245/0241 |
| 1 x | 3-jaw chuck centrically clamping 100mm |
| 1 x | BGA-0245/0243 |
| 1 x | Table Sawr TKS 315 E |
| 1 x | BGA-Bottom-115 |
| 1 x | HSS cutting blade for OZI |
| 1 x | BGA-Bottom-102 |
| 1 x | Sanding pads for OZI 220/E grit 240 |
| 1 x | BGA-0246/0243 |
| 1 x | HSS immersion saw blades for OZI |
| 2 x | TUNER 200ml |
| 1 x | Cutting tool 10 mm |
| 1 x | FLUX-OFF 400ml |
| 1 x | Cutting tool 8 mm |
| 1 x | Safety Insulated Phillips Screwdriver 14-634VDE |
| 1 x | DEGRESER 200ml |
| 1 x | broca de alta duração de 0,2mm |
| 1 x | VASELINE 200ml |
| 1 x | Broca de alta duração de 0.7mm |
| 1 x | Hand magnifier with LED light 3X |
| 1 x | Independent four jaw chuck for the DB 250 |
| 1 x | Broca de alta duração de 1.5mm |
| 1 x | PROLUB 200ml |
| 1 x | Chuck for TBM 220 |
| 1 x | Broca de alta duração de 1.0mm |
| 1 x | Broca de alta duração de 0.8mm |
| 1 x | Broca de alta duração de 0.4mm |
| 1 x | PROTECTION 200ml |
| 1 x | broca de alta duração de 0,6mm |
| 1 x | Broca de alta duração de 2.3mm |
| 1 x | Broca de alta duração de 1.3mm |
| 1 x | TOP-PIN 200ml |
| 1 x | EPROM/Flash-PLCC32-2-DIL32 socket submodule |
| 1 x | Broca de alta duração de 2.0mm |
| 1 x | Drill chuck with sliding sleeve for the tailstock |
| 1 x | DIL48/TSOP56 ZIF 18.4mm NOR-4 |
| 1 x | SPRAYFLON 200ml |
| 1 x | Broca de alta duração de 0.5mm |
| 1 x | BeeHive208S |
| 1 x | Polishing machine PM 100 |
| 1 x | SILICONE 200ml |
| 1 x | MICROFLAM gas soldering set MGS |
| 1 x | Five piece HSS chisel set |
| 1 x | Broca de alta duração de 1.1mm |
| 1 x | Broca de alta duração de 2.1mm |
| 1 x | Broca de alta duração de 0.9mm |
| 1 x | Three jaw chuck for the lathe DB 250 |
| 1 x | Broca de alta duração de 2.5mm |
| 1 x | Protective device for hand-operated MICROMOT |
| 1 x | MICROMOT Mains Adapter NG 2/S |
| 1 x | Belt sander BBS/S |
| 1 x | MICROMOT extension cord. 300cm. |
| 1 x | MICROMOT tool holder |
| 1 x | Angle polisher WP/E |
| 1 x | Steel brushes |
| 1 x | MICROMOT Mains Adapter NG 2/E |
| 1 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 1 x | Jig saw blades made of HSS |
| 1 x | Dividing attachment TA 230 for PF 250 |
| 1 x | Delta sander OZI/E |
| 1 x | Cylinder sander WAS/E |
| 1 x | Lever Dial Indicator |
| 1 x | Mill/Drill Unit BFB 2000. |
| 1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
| 1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
| 1 x | Diamond-coated cutting and roughing disc |
| 1 x | MICROMOT drill stand MB 200 |
 |
| €39,922.57 |
