2 x | sanding belts for BBS/s Grit 80 |
1 x | Broca de alta duração de 2.6mm |
1 x | Broca de alta duração de 3.0mm |
1 x | Broca de alta duração de 2.9mm |
1 x | Broca de alta duração de 2.7mm |
1 x | sanding belts for BBS/s Grit 150 |
1 x | PRECISION WIRE STRIPPER ESD-PLUS |
1 x | Broca de alta duração de 2.8mm |
1 x | Broca de alta duração de 2.4mm |
1 x | Broca de alta duração de 2.3mm |
1 x | Broca de alta duração de 2.1mm |
1 x | Broca de alta duração de 2.2mm |
1 x | Ball-shaped diamond coated 1.2mm |
1 x | Ball-shaped diamond coated 2.2mm |
6 x | Backing disc for LWS |
3 x | Bench Circular Saw KS 230 |
2 x | Radius Cutting Attachment, complete with pointed tool |
3 x | Polishing Set |
3 x | Diamond-coated cutting and roughing disc |
1 x | Conjunto de três brocas de ponto |
3 x | Angle cutter 45 ° |
1 x | Ball-shaped diamond coated 3.2mm |
3 x | Fluted filter for CW-matic |
1 x | Blade for Steel and brass |
1 x | HSS drill bits 1.6mm |
3 x | Corundum grinding disc for LWS |
1 x | Diamond Cutting Discs |
1 x | Tungsten carbide drills Ø1mm |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | HSS drill bits 0.5mm |
1 x | HSS drill bits 1.2mm |
1 x | Ball shaped milling cutters |
1 x | Sanding Drums |
3 x | Pensander PS 13 |
2 x | Bench drill press TBH |
2 x | Special Fused Alumina (Hardness N). |
1 x | Hot wire cutter THERMOCUT 650 |
1 x | Hot wire cutter THERMOCUT 12/E |
1 x | Bandsaw blade of bimetal for MBS 240/E |
2 x | 14-piece parallel supports set |
3 x | Corundum fan sander for LWS |
2 x | Polishing machine PM 100 |
2 x | Thicknesser DH 40 |
3 x | Professional set for finish grinding and polishing |
1 x | Nylon Fleece Brushes |
2 x | Delta sander OZI/E |
2 x | Fixed Steady |
1 x | Diamond Coated |
1 x | Sanding Drums |
1 x | Bench drill machine TBM 220 |
2 x | High quality corundum grinding bits |
1 x | Angle polisher WP/E |
1 x | Metal Cutting Blades |
1 x | Super safety and specialty bit set, 75-piece |
1 x | Screwdriver bit set. 49-piece. |
1 x | Tungsten carbide drills Ø1,5mm |
1 x | magnetic base 80kg |
1 x | Aluminium Die-Cast |
1 x | Diamond-coated cutting disc for MIC |
1 x | HSS drill bits 0.8mm |
1 x | Tungsten carbide drills Ø2mm |
1 x | Diamond Twist Drills |
1 x | Sanding Discs |
1 x | 10-piece wood router cutter set |
3 x | Band knife of hardened spring band steel (without teeth) |
2 x | Collet Set for accurate use on round components |
2 x | High quality corundum grinding bits |
1 x | HSS drill bits 1.0mm |
2 x | Chuck for TBM 220 |
1 x | DIL40/SOIC16 ZIF MB-1 |
2 x | lathe tools 8mm |
1 x | Independent four jaw chuck for the DB 250 |
1 x | MICRO cutter MIC |
1 x | Diamond blade |
2 x | Lathe tools 8mm pastilhados |
1 x | Top PSOP44 ZIF 600mil |
1 x | Precision Vice FMS 75 |
2 x | TCMT110204 |
1 x | Tungsten tipped saw blade |
2 x | lathe tools 12mm |
1 x | Engraving tool GG |
3 x | High quality corundum grinding bits |
1 x | Table Saw FET |
1 x | Cutting tool 16 mm |
2 x | HSS boring tool set, 6 pieces |
1 x | DIL8/SOIC8 ZIF MB95-1 |
1 x | Silicon-Carbide. |
2 x | Jig saw STS 12/E |
1 x | Flap Wheels |
3 x | lathe tools 10mm |
2 x | Sanding bands 14x13mm |
1 x | Precision lathe PD 250/E |
2 x | Corundum sanding discs for LWS |
1 x | Turning inserts SCMT09T304 |
1 x | Bottom PSOP44 NOR-2 |
3 x | Compact workshop vacuum cleaner CW-matic |
1 x | Saw blade made of high-alloy special steel |
1 x | Insert LGTN-3 |
1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
1 x | BGA-Bottom-88 |
2 x | Tungstein carbide rasp - and cutting disc |
1 x | Universal and oil siphoning pump AP 12 |
1 x | MICRO shaper MP 400 |
1 x | Precision steel vice PM 40 |
1 x | Three jaw chuck for the lathe DB 250 |
3 x | Corundum bound cutting disc for LWS |
3 x | Multipurpose Vices Primus 75 |
2 x | Lathe System PD 400 |
1 x | Felt cloth polishing disc (100 x 15mm) |
1 x | DIL40/SOIC20 ZIF MB95-1 |
1 x | Threading inserts 60º |
2 x | Precision Vice FMZ |
1 x | Turning inserts WCMX050308F |
1 x | Cutting tool HM 20 mm |
1 x | Turning inserts CCMT060204 |
1 x | Cut off/mitre saw KGS 80 |
1 x | Threading inserts 60º |
1 x | Cutting tool 8 mm |
3 x | Blade holders for DS 460 |
1 x | Bottom PSOP44 NOR-1 |
1 x | Turning inserts VCMT070204 |
1 x | Dividing attachment TA 230 for PF 250 |
2 x | WCMT050308 |
2 x | DCMT070204 |
2 x | SCMT060204 |
2 x | Cutting tool 10 mm |
2 x | Multipurpose Vices Primus100 |
2 x | High quality corundum grinding bits |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | Solid carbide saw blade |
1 x | Bottom PSOP44 NOR-3 |
1 x | Insert LGTN-2 |
2 x | SCMT09T304 |
1 x | Turning inserts CCMT09T304 |
1 x | Motor-driven carving device MSG |
3 x | High quality corundum grinding bits |
2 x | Corundum grinding disc for LWS |
1 x | DIL48/SOIC24 ZIF MB95-1 |
1 x | Router base OFV |
2 x | TCMT090204 |
2 x | Lathe tools 10mm pastilhados |
2 x | Cutting disc, with reinforcement |
1 x | MICRO Band Saw MBS 240/E |
1 x | MICRO woodturning lathe DB 250 |
1 x | Threading inserts 60º |
3 x | High quality corundum grinding bits |
2 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
1 x | Cone shaped milling cutter |
1 x | DIL48/PLCC84 ZIF 68HC11 |
1 x | DCGT 070202F-AL |
2 x | Fibre-Cut Discs |
1 x | CM2 - B16 - M10 |
3 x | Super-fine sanding discs grain 000 |
1 x | Tungsten carbide cutters set |
2 x | Brass brushes |
2 x | Replacement carving blades for MSG |
1 x | centrically clamping 125mm |
1 x | Stainless steel brushes |
1 x | DIL14W/SOIC14 ZIF 150mil |
1 x | Cotton polishers |
2 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
1 x | HSS cutting blade for OZI |
1 x | Milling cutter set (6 - 10mm) |
2 x | Fibre-Cut Discs |
1 x | Replacement cutting disc for MICRO cutter MIC |
1 x | Steel wheels |
2 x | Sanding fleece for LWS |
1 x | Milling cutter set (2 - 5mm) |
1 x | DIL18W/SOIC18 ZIF 300mil |
1 x | Flexible silicon discs |
2 x | Fibre-Cut Discs |
1 x | Quick-action tool holder kit SWH AA |
1 x | DIL16W/SOIC16 ZIF 300mil |
1 x | Fibre-Cut Discs |
1 x | Diamond Cutting Discs |
1 x | Flap Wheels |
3 x | Super-fine sanding discs grain 2000 |
1 x | Blade guides separately |
2 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
1 x | DIL48/PLCC52 ZIF-CS 68HC11 |
2 x | Coarse-toothed (25 TPI per 25mm) |
1 x | Felt polishers |
1 x | Stainless steel wheels |
2 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | DIL20W/SOIC20 ZIF 300mil |
1 x | Centre Turning Attachment |
1 x | Flexible polishing pad set |
1 x | Collet chuck ER25 for D250X550 |
1 x | quantum revolving center CM2 |
3 x | Super-fine sanding discs grain 400 |
1 x | Combi cutter 6.5/2.5mm |
1 x | Insert CCGT120404-AK |
2 x | Coarse-toothed (18 TPI per 25mm) |
2 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
1 x | Blade for Wood and Plastics |
1 x | HSS twist drill set with centring pin |
1 x | Morse taper MT2 - B16 |
1 x | machine base with shelves for D250X550 |
2 x | Professional polishing sponge |
1 x | Steady rest for D250X550 |
1 x | DIL48/PLCC52 ZIF-CS 68HC05BX |
1 x | Steel cups |
1 x | DIL16W/SOIC16 ZIF 150mil |
2 x | Microfibre cloth |
1 x | Super-Cut |
1 x | Flexible polishing pad set |
1 x | DIL16/SOIC16-1 ZIF 170mil |
1 x | Protective device for hand-operated MICROMOT |
1 x | 4-jaw chuck individually clamping 125mm |
1 x | Complete Engraving Kit with trial glass |
1 x | Lathe chuck flange for D250X550 |
1 x | 3-jaw chuck centrically clamping 125mm |
1 x | Cotton polishers |
2 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
1 x | MICROMOT steel collet set |
1 x | Flexible silicon discs |
2 x | Coarse-toothed (10 TPI per 25mm) |
1 x | Face clamping disc for D250X550 |
1 x | Tool holder type H for SWH 1-A |
1 x | DIL28/PLCC84 ZIF HS538ESC01H |
1 x | Diamond cutting blade for OZI |
1 x | Precision quick-action drill chuck 0-13mm B16 |
1 x | Diamond Cutting Discs |
1 x | Fibre-Cut Discs |
1 x | Cotton polishers |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Polishing paste |
1 x | Flexible silicon discs |
1 x | Collet chuck ER32 for D250X550 |
1 x | Spiral blade. 125mm long with plain ends (without pins). |
1 x | Lambswool polishing disc |
1 x | Multiform grindstone |
1 x | High quality corundum grinding bits |
2 x | Polishing felt, medium hard |
1 x | Diamond Cutting Discs |
1 x | Precision quick-action drill chuck 0-10mm B16 |
1 x | Insert CCGT060202-AK |
1 x | Wheels brushes |
1 x | Follow rest for D250X550 |
1 x | Tool holder type D for SWH 1-A |
1 x | Corundum sanding discs for LWS |
1 x | Three-jaw steel drill chuck |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | High quality corundum grinding bits |
1 x | Cups brushes |
1 x | DIL3/SOT23-3 ZIF-CS |
1 x | Scroll saw DS 230/E |
1 x | 2-speed scroll saw DSH |
1 x | Disc Sander TG 125/E |
1 x | Grinding and Polishing Machine SP/E |
1 x | DIL8/SOIC8-1 ZIF 170mil |
1 x | Disc Sander TG 250/E |
1 x | Steel brushes |
1 x | DIL32/SOIC32 ZIF 445mil |
1 x | DIL8/SOIC8 ZIF 200mil |
1 x | Surface planer AH 80 |
![](images/pixel_black.gif) |
€21,963.20 |