| 3 x | Band knife of hardened spring band steel (without teeth) |
| 1 x | Cross-recess Screwdrivers 000 |
| 1 x | Steel cups |
| 3 x | Flexible silicon discs |
| 1 x | sanding belts for BBS/s Grit 150 |
| 1 x | Screwdriver 0.8 |
| 2 x | |
| 1 x | Wood Lathe DB450 |
| 1 x | DIL48/TSOP56 ZIF 18.4mm NOR-4 |
| 1 x | Hand magnifier with LED light 3X |
| 1 x | Conj 5 pinças ESD |
| 1 x | Screwdriver 1.2 |
| 1 x | Router base OFV |
| 1 x | 14-piece parallel supports set |
| 1 x | Cross-recess Screwdrivers 1 |
| 1 x | Cross-recess Screwdrivers 1 |
| 2 x | Screwdriver 2.5 |
| 2 x | Mini side cutters EUROline-Conductive |
| 1 x | Felt polishers |
| 1 x | Contact bracelet with spiral cord |
| 3 x | CRIMPING PLIERS/WIRE STRIPPER |
| 3 x | CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C |
| 3 x | Flexible silicon discs |
| 1 x | Lathe tools 10mm pastilhados |
| 1 x | Crimping plier for BNC |
| 1 x | Felt polishers |
| 1 x | Cross-recess Screwdrivers 2 |
| 1 x | Cross-recess Screwdrivers 00 |
| 1 x | Cross-recess Screwdrivers 2 |
| 1 x | Screwdriver 2.0 |
| 1 x | Fine dust paper filter for CW-matic |
| 1 x | Felt polishers |
| 2 x | Cutting disc, with reinforcement |
| 2 x | MICROFLAM gas soldering set MGS |
| 1 x | Screwdriver 1.5 |
| 1 x | Screwdriver 1.8 |
| 1 x | Snipe nose pliers 45º EUROline-Conductive |
| 1 x | Fibre-Cut Discs |
| 1 x | Snipe nose pliers 45º EUROline-Conductive |
| 2 x | Fibre-Cut Discs |
| 1 x | High quality corundum grinding bits |
| 2 x | Diamond Cutting Discs |
| 1 x | Steel brushes |
| 1 x | Cross-recess Screwdrivers 0 |
| 1 x | High quality corundum grinding bits |
| 1 x | Flat nose pliers 45º EUROline-Conductive |
| 1 x | Round nose pliers 45º EUROline-Conductive |
| 1 x | ESD-handling ser 9-361 |
| 2 x | Diamond Cutting Discs |
| 1 x | ESD-handling set |
| 1 x | Snipe nose pliers 45º EUROline-Conductive |
| 1 x | BIT-SET |
| 2 x | Table Saw TKS 2500 SC |
| 3 x | Five piece HSS chisel set |
| 1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
| 1 x | High quality corundum grinding bits |
| 2 x | Fibre-Cut Discs |
| 2 x | Three jaw chuck for the lathe DB 250 |
| 2 x | Independent four jaw chuck for the DB 250 |
| 1 x | End side cutters EUROline-Conductive |
| 2 x | Hot wire cutter THERMOCUT 230/E |
| 2 x | Screwdriver bit set. 49-piece. |
| 1 x | Protective device for hand-operated MICROMOT |
| 1 x | Cotton polishers |
| 2 x | Multipurpose Vices Primus 75 |
| 1 x | replacement glass fibre for 2-166 Ø 4mm (PU 10) |
| 2 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 2 x | High quality corundum grinding bits |
| 3 x | Tungsten carbide cutters set |
| 1 x | Three-jaw steel drill chuck |
| 3 x | High quality corundum grinding bits |
| 1 x | lathe tools 10mm |
| 1 x | Sanding bands 14x13mm |
| 1 x | Mini side cutters EUROline-Conductive |
| 1 x | Cotton polishers |
| 1 x | Lathe tools 8mm pastilhados |
| 1 x | Cotton polishers |
| 1 x | Drill chuck with sliding sleeve for the tailstock |
| 1 x | Felt polishers |
| 1 x | High quality corundum grinding bits |
| 2 x | Angle cutter 45 ° |
| 1 x | Cross-recess Screwdrivers Pozidriv 1 |
| 1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
| 2 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Universal and oil siphoning pump AP 12 |
| 1 x | Screwdriver 3.0 |
| 2 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
| 1 x | Screwdriver 4.0 |
| 2 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
| 2 x | Super safety and specialty bit set, 75-piece |
| 1 x | Screwdriver 5.5 |
| 1 x | Cross-recess Screwdrivers Pozidriv 2 |
| 1 x | Coarse-toothed (10 TPI per 25mm) |
| 1 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 1 x | Screwdriver 5.5 |
| 1 x | Compact workshop vacuum cleaner CW-matic |
| 1 x | Collet Set for accurate use on round components |
| 1 x | Centre Turning Attachment |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 2 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
| 1 x | Brass brushes |
| 1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
| 1 x | Diamond Cutting Discs |
| 1 x | Slot cutter 5.0mm |
| 1 x | Rounding over cutter 6.4mm |
| 2 x | Diamond cutting blade for OZI |
| 2 x | Flexible silicon discs |
| 1 x | Replacement cutting disc for MICRO cutter MIC |
| 1 x | Solid carbide stylus for engraving |
| 1 x | Lambswool polishing disc |
| 1 x | Sanding pads for OZI 220/E grit 80 |
| 1 x | V-slot cutter 6.5mm |
| 1 x | Grinding mop cylinder grit 80 |
| 1 x | Bench drill press TBH |
| 1 x | Grinding mop cylinder grit 120 |
| 1 x | Diamond Twist Drills |
| 2 x | Four Jaw Chuck |
| 2 x | Diamond Grinding Bits 5mm |
| 1 x | Sanding fleece for LWS |
| 1 x | Core box bit 3.2mm |
| 1 x | Glass fibre contact cleaner brush |
| 1 x | Table Sawr TKS 315 E |
| 1 x | Super-Cut |
| 1 x | Diamond blade for MBS 240/E |
| 1 x | Solid carbide stylus for engraving |
| 1 x | Grinding and Polishing Machine SP/E |
| 2 x | Diamond Cutting Discs |
| 2 x | Diamond Grinding Bits 1,8mm |
| 1 x | Sanding fleece for LWS |
| 2 x | Diamond Grinding Bits 1,8mm |
| 2 x | Disc cutters |
| 1 x | Slot cutter 6.5mm |
| 2 x | Disc Sander TG 250/E |
| 1 x | Fluted filter for CW-matic |
| 1 x | Edge cutter with pin 6.4mm |
| 1 x | Rebating cutter 6.4mm |
| 1 x | Disc Sander TG 125/E |
| 2 x | Cylindrical cutters |
| 2 x | surface planing and thicknessing ADH 200 |
| 1 x | Grinding mop cylinder grit 120 |
| 1 x | Diamond blade |
| 1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
| 1 x | Tungsten Carbide Tipped (TCT) |
| 1 x | Diamond Coated |
| 2 x | Half round cutter 13mm |
| 1 x | Bandsaw blade of bimetal for MBS 240/E |
| 1 x | Diamond-coated cutting disc for MIC |
| 2 x | Flexible polishing pad set |
| 1 x | Super-fine sanding discs grain 400 |
| 1 x | Diamond-coated cutting and roughing disc |
| 2 x | Flap Wheels |
| 1 x | Slot cutter 3.2mm |
| 1 x | Diamond Grinding Bits 1mm |
| 1 x | Super-fine sanding discs grain 000 |
| 1 x | HSS cutting blade for OZI |
| 1 x | Corundum bound cutting disc for LWS |
| 2 x | Delta sander OZI/E |
| 1 x | Grinding mop cylinder grit 240 |
| 1 x | Super-fine sanding discs grain 2000 |
| 2 x | Flexible polishing pad set |
| 2 x | Milling cutter set (2 - 5mm) |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Step clamps made of steel |
| 1 x | HSS twist drill set with centring pin |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Replacement carving blades for MSG |
| 1 x | Angle polisher WP/E |
| 1 x | Brass contact cleaner brush |
| 1 x | Fibre-Cut Discs |
| 1 x | HSS boring tool set, 6 pieces |
| 1 x | High quality corundum grinding bits |
| 1 x | High quality corundum grinding bits |
| 1 x | Fibre-Cut Discs |
| 1 x | Belt sander BS/E |
| 1 x | Blade guides separately |
| 1 x | Polishing machine PM 100 |
| 1 x | Blade for Wood and Plastics |
| 1 x | MICROMOT Mains Adapter NG 5/E |
| 1 x | MICRO-screwdrivers |
| 1 x | Professional Drill/Grinder IBS/E |
| 1 x | Precision Vice FMZ |
| 1 x | sanding belts for BBS/s Grit 240 |
| 2 x | MICROMOT tool holder |
| 1 x | Professional polishing sponge |
| 1 x | Multipurpose Vices Primus100 |
| 1 x | Polishing paste |
| 1 x | Felt cloth polishing disc (100 x 15mm) |
| 1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
| 1 x | Aluminium Die-Cast |
| 1 x | Milling cutter set (6 - 10mm) |
| 1 x | Precision lathe PD 250/E |
| 1 x | Mill/Drill Unit BFB 2000. |
| 1 x | MICROMOT drill stand MB 200 |
| 1 x | MICROMOT 230/E |
| 1 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 1 x | sanding belts for BBS/s Grit 80 |
| 1 x | Nylon Fleece Brushes |
| 1 x | Universal polishing paste |
| 1 x | Blade for Steel and brass |
| 1 x | Microfibre polishing wheel, 15-ply (100mm) |
| 1 x | Multiform grindstone |
| 1 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
 |
| €14,072.74 |
