| 3 x | Cutting tools of high quality cobalt HSS steel, ground |
| 2 x | HSS boring tool set, 6 pieces |
| 3 x | Cutting tools of high quality cobalt HSS steel, ground |
| 2 x | Precision lathe PD 250/E |
| 2 x | Three piece thread cutting set |
| 2 x | Lathe System PD 400 |
| 4 x | Engraving tool GG |
| 1 x | Special Fused Alumina (Hardness N). |
| 2 x | Fibre-Cut Discs |
| 2 x | Felt polishers |
| 4 x | Slot cutter 5.0mm |
| 1 x | Super-fine sanding discs grain 400 |
| 2 x | Fibre-Cut Discs |
| 1 x | Super-fine sanding discs grain 2000 |
| 2 x | MICRO Band Saw MBS 240/E |
| 4 x | Compact workshop vacuum cleaner CW-matic |
| 1 x | Felt cloth polishing disc (100 x 15mm) |
| 2 x | Felt polishers |
| 1 x | Polishing felt, medium hard |
| 1 x | Fixed Steady |
| 3 x | MICROFLAME burner MFB/E |
| 3 x | MICROFLAM gas soldering set MGS |
| 2 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 1 x | Drill chuck with sliding sleeve for the tailstock |
| 2 x | Felt polishers |
| 2 x | Fibre-Cut Discs |
| 3 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 1 x | Table Saw FET |
| 1 x | Five piece HSS chisel set |
| 1 x | Professional polishing sponge |
| 2 x | Fibre-Cut Discs |
| 1 x | Scroll saw DS 230/E |
| 1 x | Jig saw STS 12/E |
| 2 x | Fibre-Cut Discs |
| 4 x | Slot cutter 6.5mm |
| 5 x | Half round cutter 13mm |
| 2 x | Fibre-Cut Discs |
| 2 x | Flame shaped milling cutters |
| 1 x | Silicon-Carbide. |
| 3 x | Router base OFV |
| 2 x | Cotton polishers |
| 3 x | Footswitch FS |
| 1 x | Cutting disc, with reinforcement |
| 2 x | Conjunto de três brocas de ponto |
| 1 x | Corundum grinding disc for LWS |
| 1 x | Grinding mop cylinder grit 120 |
| 1 x | Corundum grinding disc for LWS |
| 2 x | Flap Wheels |
| 1 x | Corundum sanding discs for LWS |
| 1 x | Coarse-toothed (18 TPI per 25mm) |
| 1 x | Grinding and Polishing Machine SP/E |
| 1 x | Gear Chuck |
| 1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
| 1 x | Grinding mop cylinder grit 80 |
| 1 x | Cups brushes |
| 2 x | Flexible silicon discs |
| 1 x | Brass brushes |
| 1 x | Four Jaw Chuck |
| 1 x | Crosscut 'Super-Cut' blade |
| 4 x | Blade for Wood and Plastics |
| 1 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 3 x | Universal and oil siphoning pump AP 12 |
| 3 x | Fluted filter for CW-matic |
| 2 x | Dividing attachment TA 230 for PF 250 |
| 2 x | MICROMOT steel collet set |
| 2 x | Micro Compound Table KT 70 |
| 1 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
| 1 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
| 2 x | Cylinder shaped milling cutters |
| 1 x | Corundum fan sander for LWS |
| 2 x | sanding belts for BBS/s Grit 80 |
| 1 x | Flexible silicon discs |
| 2 x | Flap Wheels |
| 1 x | MICROMOT drill stand MB 200 |
| 1 x | Corundum sanding discs for LWS |
| 1 x | Corundum fan sander for LWS |
| 2 x | sanding belts for BBS/s Grit 240 |
| 1 x | Chuck for TBM 220 |
| 2 x | 14-piece parallel supports set |
| 2 x | Cotton polishers |
| 1 x | Centre Turning Attachment |
| 1 x | Three-jaw steel drill chuck |
| 1 x | Coarse-toothed (25 TPI per 25mm) |
| 1 x | Corundum bound cutting disc for LWS |
| 1 x | Collet Set for accurate use on round components |
| 2 x | Cotton polishers |
| 2 x | Flexible polishing pad set |
| 2 x | Flexible silicon discs |
| 3 x | Screwdriver bit set. 49-piece. |
| 2 x | High quality corundum grinding bits |
| 1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
| 2 x | MICROMOT extension cord. 300cm. |
| 1 x | Coarse-toothed (10 TPI per 25mm) |
| 1 x | Diamond-coated cutting and roughing disc |
| 2 x | Cone shaped milling cutter |
| 1 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
| 1 x | Grinding mop cylinder grit 120 |
| 4 x | Combi cutter 6.5/2.5mm |
| 3 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
| 2 x | Super safety and specialty bit set, 75-piece |
| 3 x | Blade guides separately |
| 3 x | Rounding over cutter 6.4mm |
| 3 x | Bandsaw blade of bimetal for MBS 240/E |
| 3 x | Rebating cutter 6.4mm |
| 3 x | V-slot cutter 6.5mm |
| 3 x | Band knife of hardened spring band steel (without teeth) |
| 1 x | sanding belts for BBS/s Grit 150 |
| 3 x | Angle cutter 45 ° |
| 3 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
| 3 x | Edge cutter with pin 6.4mm |
| 3 x | Blade for Steel and brass |
| 2 x | MICROMOT glue gun HKP 220 |
| 1 x | MICRO-screwdrivers |
| 1 x | Diamond blade for MBS 240/E |
| 1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
| 2 x | Precision Vice FMS 75 |
| 1 x | Universal holder UHZ |
| 2 x | Multipurpose Vices Primus 75 |
| 1 x | MICRO Heat gun MH 550 |
| 2 x | Precision Vice FMZ |
| 2 x | Multipurpose Vices Primus100 |
| 2 x | Precision steel vice PM 40 |
| 1 x | DIL8/SOT23-6 ZIF-CS PIC |
| 1 x | Complete Engraving Kit with trial glass |
| 2 x | BGA-Bottom-115 |
| 1 x | DIL48/SDIP56 ZIF 68HC05Bx |
| 1 x | DIL28W/SOIC28 ZIF 300mil |
| 1 x | Flexible polishing pad set |
| 1 x | Diamond Grinding Bits 1mm |
| 2 x | BGA-Bottom-102 |
| 2 x | Insulation Resistance Tester MG125 |
| 1 x | DIL20/SOIC20 ZIF 300 mil |
| 1 x | Ball-shaped diamond coated 3.2mm |
| 1 x | DIL32/SDIP64-1 ZIF Toshiba-BM1136 |
| 2 x | BGA-0245/0241 |
| 2 x | Diamond Cutting Discs |
| 1 x | Diamond Grinding Bits 1,8mm |
| 2 x | BGA-Bottom-101 |
| 1 x | BGA-Bottom-111 |
| 1 x | DIL40/SOIC28 ZIF AWM-1 |
| 1 x | Diamond Grinding Bits 5mm |
| 1 x | Felt polishers |
| 2 x | BeeHive208S |
| 1 x | DIL40/SOIC20 ZIF MB95-1 |
| 1 x | Ball-shaped diamond coated 1.2mm |
| 1 x | DIL24W/SOIC24 ZIF 300mil |
| 1 x | DIL32/SOIC32 ZIF 445mil |
| 1 x | DIL18W/SOIC18 ZIF 300mil |
| 1 x | Ball-shaped diamond coated 2.2mm |
| 1 x | DIL44/SOIC44 ZIF-CS |
| 1 x | DIL16/SOIC16 ZIF 200 mil |
| 1 x | DIL40/SOIC16 ZIF MB-1 |
| 1 x | DIL16/SOIC16-1 ZIF 170mil |
| 1 x | DIL20/SOIC20 ZIF 200mil |
| 2 x | BGA-0246/0244 |
| 2 x | BGA-Bottom-10 |
| 1 x | DIL40/SDIP52 ZIF 55x |
| 1 x | DIL42/SDIP42 ZIF 600mil |
| 2 x | BGA-Bottom-118 |
| 2 x | Diamond Cutting Discs |
| 2 x | BGA-Bottom-125 |
| 1 x | DIL32/SOIC32 ZIF 300 mil |
| 1 x | DIL32/SDIP64 ZIF H8-1 |
| 1 x | DIL16W/SOIC16 ZIF 300mil |
| 1 x | DIL28/SOIC28 ZIF 330 mil |
| 2 x | BGA-Bottom-105 |
| 2 x | Diamond Cutting Discs |
| 2 x | BGA-0245/0242 |
| 2 x | BGA-Bottom-108 |
| 2 x | Diamond Cutting Discs |
| 1 x | Diamond Grinding Bits 1,8mm |
| 2 x | BGA-Bottom-11 |
| 2 x | BGA-Bottom-103 |
| 2 x | BGA-0245/0243 |
| 2 x | BGA-Bottom-1 |
| 1 x | Diamond Twist Drills |
| 1 x | DIL20W/SOIC20 ZIF 300mil |
| 2 x | BGA-Bottom-106 |
| 1 x | DIL14W/SOIC14 ZIF 150mil |
| 1 x | DIL16W/SOIC16 ZIF 150mil |
| 1 x | Polishing paste |
| 1 x | DIL32/SDIP32 ZIF 400mil |
| 1 x | DIL3/SOT23-3 ZIF-CS |
| 2 x | BGA-0246/0243 |
| 1 x | DIL40/SOIC20 ZIF AWM-1 |
| 1 x | Core box bit 3.2mm |
| 1 x | High quality corundum grinding bits |
| 1 x | DIL40/TQFP64 ZIF AVRmega-2 |
| 1 x | DIL44/TQFP44-3 ZIF |
| 1 x | DIL40/TQFP64 ZIF CC-1 |
| 1 x | Slot cutter 3.2mm |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-5 |
| 1 x | DIL44/PSOP44 ZIF 600 mil |
| 1 x | DIL48/TQFP144 ZIF ST10-1 |
| 1 x | High quality corundum grinding bits |
| 1 x | DIL40/TSOP40 ZIF 18.4mm Flash-1 |
| 1 x | DIL48/SSOP48 ZIF 300mil |
| 1 x | DIL48/TQFP100-2 ZIF PLD-1 |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-1 |
| 1 x | DIL44/SSOP44 ZIF 240mil |
| 1 x | DIL40/TSOP40 ZIF 18.4mm |
| 1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
| 1 x | DIL40/TSOP40 ZIF-CS 12.4mm |
| 1 x | DIL44/TSOP44-II ZIF 400mil |
| 1 x | DIL40/TQFP44 ZIF PIC-1 |
| 1 x | DIL48/TQFP100 ZIF ST92Fxxx |
| 1 x | DIL40/TQFP64 ZIF EM652X |
| 1 x | DIL40/TQFP64 ZIF PIC-1A |
| 1 x | Sanding bands 14x13mm |
| 1 x | DIL32/TSOP32 ZIF 11.8mm |
| 1 x | DIL40/TQFP44 ZIF EM652X |
| 1 x | DIL48/SSOP56 ZIF Flash-3 |
| 1 x | 10-piece wood router cutter set |
| 1 x | BeeHive204 |
| 1 x | DIL34/SSOP34-1 ZIF-CS |
| 1 x | DIL40/VQFP64 ZIF AWM-1 |
| 1 x | DIL40/TQFP44 ZIF AWM-1 |
| 1 x | High quality corundum grinding bits |
| 1 x | DIL48/SSOP56 ZIF Flash-2 |
| 1 x | DIL32/TSOP32 ZIF 12.4mm Flash |
| 1 x | DIL48/TQFP100 ZIF PLD-2 |
| 1 x | Metal Cutting Blades |
| 1 x | DIL48/TSOP48 ZIF 18.4mm |
| 1 x | Nylon Fleece Brushes |
| 1 x | DIL40/TQFP52 ZIF EM652X |
| 1 x | DIL48/TSOP56 ZIF 18.4mm NOR-4 |
| 1 x | High quality corundum grinding bits |
| 1 x | High quality corundum grinding bits |
| 1 x | High quality corundum grinding bits |
| 1 x | BeeProg2 |
| 1 x | Insulation Resistance Tester MG500 |
| 1 x | DIL48/SSOP90 ZIF Flash-1 |
| 1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
| 1 x | Bottom PSOP44 NOR-2 |
| 2 x | Top PSOP44 ZIF 600mil |
| 1 x | DIL28/TSOP28 ZIF 11,8mm Flash |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-6 |
| 1 x | Bottom PSOP44 NOR-1 |
| 1 x | Sanding bands 14x13mm |
| 1 x | DIL34/SSOP34 ZIF 200 mil |
| 1 x | Bottom PSOP44 NOR-3 |
| 1 x | DIL40/TQFP80-1 ZIF PIC-1A |
| 1 x | Beeprog2C |
| 1 x | Sanding Drums |
| 1 x | DIL48/TQFP48-1 ZIF |
| 1 x | Sanding Drums |
| 1 x | DIL8/SSOP8 ZIF 120mil |
| 1 x | DIL44/TQFP44-2 ZIF |
| 1 x | DIL48/SSOP70 ZIF OKI-1 |
| 1 x | DIL40/TQFP80-1 ZIF AWM-1 |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-2 |
| 1 x | High quality corundum grinding bits |
| 1 x | DIL44/TQFP44-1 Zif |
| 1 x | DIL48/SSOP56 ZIF Flash-1 |
| 1 x | Sanding Discs |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-3 |
| 1 x | DIL48/TQFP64 ZIF HC908-1 |
| 1 x | Sanding Drums |
| 1 x | Sanding Discs |
| 1 x | DIL48/TSOP48 ZIF 15.4mm |
| 1 x | Sanding Drums |
| 1 x | Tungsten carbide drills Ø1,5mm |
| 1 x | DIL28/PLCC32 ZIF EPROM |
| 1 x | Disc cutters |
| 1 x | Solid carbide stylus for engraving |
| 1 x | DIL28/QFP64 ZIF H8/3644 |
| 1 x | DIL44/MLF44-1 ZIF-CS |
| 1 x | DIL40/QFP100 ZIF AVR-1 |
| 1 x | DIL48/QFP100 ZIF PLD-2 |
| 1 x | DIL40/QFP64-3 ZIF NEC-1 |
| 1 x | Ball shaped milling cutters |
| 1 x | DIL48/QFP100 ZIF PLD-1 |
| 1 x | DIL20/PLCC20 ZIF-CS |
| 1 x | Tungsten carbide drills Ø1mm |
| 1 x | DIL48/MQFP80 ZIF C500 |
| 1 x | HSS drill bits 0.5mm |
| 1 x | DIL24/QSOP24 ZIF 150mil |
| 1 x | DIL32/PLCC84 ZIF HS3334ESCF1H |
| 1 x | DIL28/QFP52 ZIF-CS SX52 |
| 1 x | HSS drill bits 0.8mm |
| 1 x | BGA-Bottom-126 |
| 1 x | DIL48/QFN48 ZIF-CS |
| 1 x | DIL28/PLCC28 ZIF |
| 1 x | DIL40/PLCC68 ZIF DS87C550 |
| 1 x | DIL40/MLF64 ZIF-CS AVR-1 |
| 1 x | DIL40/QFP64 ZIF LPC-1 |
| 1 x | DIL40/PLCC44 ZIF PIC-1 |
| 1 x | DIL40/PLCC52 ZIF DS87C530 |
| 1 x | DIL48/LQFP64 ZIF M38039/M39049 |
| 1 x | Set of special steel cutters |
| 1 x | DIL28/PLCC28 ZIF-CS |
| 1 x | Cylindrical cutters |
| 1 x | DIL40/PLCC44 ZIF AWM-1 |
| 1 x | DIL48/QFP100 ZIF MB90F-1 |
| 1 x | HSS drill bits 1.6mm |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | DIL40/PLCC68 ZIF AWM-1 |
| 1 x | DIL40/PLCC52 ZIF AWM-1 |
| 1 x | DIL48/QFP100 ZIF PLD-3 |
| 1 x | DIL40/PLCC44 ZIF W-EPROM / MCS51 |
| 1 x | DIL32/PLCC32 ZIF-CS |
| 1 x | Set of precision cutters |
| 1 x | DIL28/QFN28-2 ZIF-CS |
| 1 x | DIL8/QFN8-1 ZIF-CS |
| 1 x | DIL32/PLCC32 ZIF |
| 1 x | DIL48/LQFP64 ZIF M16C/Tiny |
| 1 x | DIL40/QFP64-1 ZIF-CS NEC-1 |
| 1 x | HSS twist drill set with centring pin |
| 1 x | DIL48/QFP100 ZIF MSP430-1 |
| 1 x | DIL32/QFP64 ZIF H8-1 |
| 1 x | Grinding mop cylinder grit 240 |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | DIL32/PLCC32 ZIF-CS NOR-1 |
| 1 x | DIL48/MQFP80 ZIF C164 |
| 1 x | Tungsten carbide cutter 2.0mm |
| 1 x | DIL40/QFP64-2 ZIF-CS NEC-1 |
| 1 x | DIL40/PLCC28 ZIF AWM-1 |
| 1 x | DIL40/PLCC52 ZIF AWM-2 |
| 1 x | HSS twist drill set to DIN 338 |
| 1 x | DIL48/QFP100 ZIF NEC-1 |
| 1 x | Tungsten carbide cutter 1.0mm |
| 1 x | DIL28/PLCC84 ZIF HS538ESC01H |
| 1 x | DIL40/QFP144 ZIF H8S-1 |
| 1 x | Tungsten carbide cutters set |
| 1 x | HSS drill bits 1.0mm |
| 1 x | Milling cutter set (2 - 5mm) |
| 1 x | Solid carbide stylus for engraving |
| 1 x | DIL48/QFP100 ZIF PLD-4 |
| 1 x | DIL32/MLF32-1 ZIF |
| 1 x | DIL40/QFP64-4 ZIF NEC-1 |
| 1 x | DIL40/QFP144 ZIF LPC-1 |
| 1 x | DIL40/PLCC52 ZIF MCS51-2 |
| 1 x | DIL44/QFN44-2 ZIF-CS |
| 1 x | Tungsten carbide cutter 3.0mm |
| 1 x | Milling cutter set (6 - 10mm) |
| 1 x | DIL40/QFP80 ZIF M37702 |
| 1 x | DIL40/MQFP52 ZIF ADuC812 |
| 1 x | Tungsten carbide drills Ø2mm |
| 1 x | HSS drill bits 1.2mm |
| 1 x | DIL48/PQFP144 ZIF ST10-1 |
| 1 x | Cross-recess Screwdrivers 2 |
| 2 x | Lever Dial Indicator |
| 1 x | ESD Brushe |
| 1 x | ESD Brushe |
| 1 x | Cross-recess Screwdrivers 000 |
| 1 x | Cross-recess Screwdrivers 1 |
| 1 x | ESD-handling set |
| 1 x | Floor cover ESD |
| 1 x | DIL48/PQFP100 ZIF ST92Fxxx |
| 1 x | Cross-recess Screwdrivers 00 |
| 1 x | ESD-handling ser 9-361 |
| 1 x | Cross-recess Screwdrivers 1 |
| 1 x | Cross-recess Screwdrivers 0 |
| 1 x | DIL48/PQFP100 ZIF ST10-1 |
| 1 x | Cross-recess Screwdrivers 2 |
| 1 x | DIL48/PQFP100 ZIF PLD-1 |
| 1 x | DIL48/PQFP80 ZIF M58BW-1 |
| 1 x | Broca de alta duração de 2.9mm |
| 1 x | TORX-screwdrivers T5 |
| 1 x | Wrench Keys 0.9 |
| 1 x | Screwdriver 5.5 |
| 1 x | Socket Wrenches 4.5 |
| 1 x | Screwdriver 4.0 |
| 1 x | Wrench Keys 1.3 |
| 1 x | Wrench Keys 2.0 |
| 1 x | Socket Wrenches 5.5 |
| 1 x | TORX-screwdrivers T8 |
| 1 x | Crocodile clip |
| 1 x | Wrench Keys 1.5 |
| 1 x | Screwdriver 1.5 |
| 1 x | Socket Wrenches 4.0 |
| 1 x | TORX-screwdrivers T4 |
| 1 x | Screwdriver 2.5 |
| 1 x | Socket Wrenches 3.0 |
| 1 x | Socket Wrenches 2.0 |
| 1 x | End side cutters 45º EUROline-Conductive |
| 1 x | Snipe nose pliers 45º EUROline-Conductive |
| 1 x | EUROline-Conductive set of pliers |
| 1 x | Screwdriver 3.0 |
| 1 x | Screwdriver 1.8 |
| 1 x | Mini side cutters EUROline-Conductive |
| 1 x | Earth wire with dummy Schunko-plug |
| 1 x | TORX-screwdrivers T6 |
| 1 x | Earth wire |
| 1 x | Snipe nose pliers 45º EUROline-Conductive |
| 1 x | TORX-screwdrivers T7 |
| 1 x | Round nose pliers 45º EUROline-Conductive |
| 1 x | Screwdriver 0.8 |
| 1 x | End side cutters EUROline-Conductive |
| 1 x | Mini side cutters EUROline-Conductive |
| 1 x | Socket Wrenches 3.5 |
| 1 x | Earthing module |
| 1 x | Side cutters EUROline-Conductive |
| 1 x | Socket Wrenches 1.5 |
| 1 x | Snipe nose pliers 45º EUROline-Conductive |
| 1 x | Screwdriver 1.2 |
| 1 x | Earth wire |
| 1 x | Mini side cutters EUROline-Conductive |
 |
| €67,447.94 |
