1 x | IC tweezers |
1 x | PLCC Puller |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | FLUX-OFF 400ml |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | TUNER 200ml |
1 x | Snipe nose pliers 45º EUROline-Conductive |
3 x | Precision caliper square |
3 x | magnetic base 80kg |
1 x | Mini side cutters EUROline-Conductive |
1 x | CD-CLEANER 200ml |
1 x | 6-piece screwdriver and cross-recess set |
1 x | 6-piece screwdriver and cross-recess set |
1 x | 6-piece screwdriver and cross-recess set |
1 x | DEGRESER 200ml |
1 x | Flat nose pliers 45º EUROline-Conductive |
1 x | Mini side cutters EUROline-Conductive |
1 x | End side cutters EUROline-Conductive |
1 x | 6-piece TORX-screwdriver-set |
3 x | Precision magnetic gauge stand |
1 x | End side cutters 45º EUROline-Conductive |
1 x | Side cutters EUROline-Conductive |
1 x | Round nose pliers 45º EUROline-Conductive |
1 x | Mini side cutters EUROline-Conductive |
1 x | 6pcs Double Open End wrench set |
2 x | Steel tape measure |
1 x | EUROline-Conductive set of pliers |
3 x | Digital caliper gauge 300 mm |
1 x | MICROMOT steel collet set |
1 x | MULTI 200ml |
1 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
1 x | Three piece thread cutting set |
1 x | PROLUB 200ml |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | PRECISION WIRE STRIPPER ESD-PLUS |
1 x | BeeHive208S |
1 x | Broca de alta duração de 2.4mm |
2 x | MICROMOT Mains Adapter NG 2/S |
1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
1 x | Broca de alta duração de 0.7mm |
1 x | Protective device for hand-operated MICROMOT |
1 x | Broca de alta duração de 1.5mm |
1 x | PROTECTION 200ml |
1 x | Scroll saw DS 230/E |
1 x | MICRO Band Saw MBS 240/E |
1 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
1 x | Hot wire cutter THERMOCUT 650 |
1 x | Broca de alta duração de 2.5mm |
1 x | Surface planer AH 80 |
1 x | MICRO woodturning lathe DB 250 |
1 x | Hot wire cutter THERMOCUT 230/E |
1 x | Broca de alta duração de 0.5mm |
1 x | Broca de alta duração de 0.8mm |
1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | Super jig saw STS/E |
2 x | Bench Circular Saw KS 230 |
1 x | SPRAYFLON 200ml |
1 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
1 x | Super safety and specialty bit set, 75-piece |
1 x | Grinding mop cylinder grit 80 |
1 x | Replacement carving blades for MSG |
1 x | 2-speed scroll saw DSH |
1 x | Universal and oil siphoning pump AP 12 |
1 x | Hot wire cutter THERMOCUT 12/E |
1 x | Broca de alta duração de 0.4mm |
1 x | Motor-driven carving device MSG |
1 x | VASELINE 200ml |
1 x | Footswitch FS |
1 x | Pinça SOIC de 8 pinos |
1 x | Broca de alta duração de 2.3mm |
1 x | HSS boring tool set, 6 pieces |
1 x | broca de alta duração de 0,6mm |
1 x | MICRO shaper MP 400 |
1 x | Broca de alta duração de 1.1mm |
1 x | Thicknesser DH 40 |
1 x | MICRO cutter MIC |
1 x | Micro Compound Table KT 70 |
1 x | Precision lathe PD 250/E |
1 x | Jig saw STS 12/E |
1 x | BeeHive204 |
1 x | MICROMOT tool holder |
1 x | Multiform grindstone |
1 x | Table Saw FET |
1 x | Broca de alta duração de 2.0mm |
1 x | Dividing attachment TA 230 for PF 250 |
1 x | Cutting disc, with reinforcement |
1 x | Three-jaw steel drill chuck |
1 x | SILICONE 200ml |
2 x | MICROMOT Mains Adapter NG 5/E |
1 x | Broca de alta duração de 1.4mm |
1 x | Broca de alta duração de 1.0mm |
1 x | Broca de alta duração de 0.3mm |
1 x | Broca de alta duração de 2.1mm |
1 x | Broca de alta duração de 0.9mm |
1 x | MICROMOT extension cord. 300cm. |
1 x | Broca de alta duração de 2.2mm |
1 x | Mill/Drill Unit BFB 2000. |
1 x | Cutter head for copy and surface milling MT2 |
2 x | Tungsten Carbide Tipped (TCT) |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Grinding mop cylinder grit 120 |
1 x | SPRAYOIL 200ml |
1 x | Cut off/mitre saw KGS 80 |
1 x | MICROMOT drill stand MB 200 |
1 x | Grinding mop cylinder grit 240 |
1 x | Grinding mop cylinder grit 120 |
1 x | MICROMOT Mains Adapter NG 2/E |
1 x | Contact bracelet with spiral cord |
1 x | Combination pliers 185mm |
2 x | MICRO Miller FF 500 |
1 x | MICRO Miller MF 70 |
1 x | Diamond Coated |
1 x | Ceramic-tipped tweezers and ESD 5-096 |
1 x | Sanding pads for OZI 220/E grit 80 |
2 x | TORQUE-SCREWDRIVER 0.5 - 1.5 Nm |
1 x | Flat nose pliers 160mm |
1 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
2 x | MICRO Miller FF 230 |
1 x | BeeProg2 |
1 x | Side cutters 160mm |
1 x | Earth wire |
1 x | Telephon pliers straight 200mm |
1 x | HSS cutting blade for OZI |
1 x | ESD Tweezers 5-192 |
1 x | Earth wire with dummy Schunko-plug |
1 x | Side cutters 180mm |
1 x | SmartProg2 |
1 x | Telephon pliers bent 200mm |
1 x | Wire strippers 160mm |
1 x | FLUX DISPENSING PEN, LEAD FREE |
1 x | Telephon pliers straight 160mm |
1 x | Crocodile clip |
1 x | OPTI BF20L VARIO |
1 x | ESD Tweezers 5-191 |
1 x | Telephon pliers bent 160mm |
1 x | OPTI BF16 Vario |
1 x | Conj 5 pinças ESD |
1 x | 6-piece set of ESD/EGB tweezers |
1 x | Ceramic-tipped tweezers and ESD 5-095 |
1 x | Sanding pads for OZI 220/E grit 240 |
1 x | Combination pliers 160mm |
1 x | HSS immersion saw blades for OZI |
1 x | Replacement cutting disc for MICRO cutter MIC |
1 x | Earthing module |
1 x | Beeprog2C |
1 x | ESD Tweezers 5-194 |
1 x | Diamond-coated cutting disc for MIC |
1 x | OPTI BF20 VARIO |
1 x | HSS immersion saw blades for OZI |
1 x | ESD Tweezers 5-193 |
1 x | Super-Cut |
1 x | Sanding pads for OZI 220/E grit 150 |
1 x | Diamond cutting blade for OZI |
1 x | Round nose pliers 160mm |
1 x | Earth wire |
1 x | Floor cover ESD |
1 x | Fine dust paper filter for CW-matic |
1 x | 6-piece TORX-screwdriver-set ESD |
1 x | Crosscut 'Super-Cut' blade |
1 x | ESD-handling set |
1 x | 6-piece screwdriver and cross-recess set ESD |
1 x | Diamond blade |
1 x | 6-piece wrench key set ESD |
1 x | Jig saw blades made of HSS |
1 x | Fluted filter for CW-matic |
1 x | sandpaper for PS 13 Grot 180 |
1 x | Tungstein carbide rasp - and cutting disc |
1 x | 6-piece socket wrenches ESD |
1 x | Tungsten tipped saw blade |
1 x | Supercut jig saw blades of special steel |
1 x | sandpaper for PS 13 Grit 240 |
1 x | ESD-handling ser 9-361 |
1 x | sandpaper for PS 13 Grit 400 |
1 x | Solid carbide saw blade |
1 x | Ball-shaped diamond coated 2.2mm |
1 x | Multipurpose Vices Primus 75 |
1 x | Long neck straight drill/grinder LB/E |
1 x | Precision Drill/Grinder FBS 240/E |
1 x | sanding belts for BBS/s Grit 240 |
1 x | Long neck angle milling/drilling unit LWB 220/E |
1 x | Four Jaw Chuck |
1 x | Telephone pliers stright 205mm |
1 x | Precision steel vice PM 40 |
1 x | Combi cutter 6.5/2.5mm |
1 x | Telephone pliers bent 165mm |
1 x | Side cutters 170mm |
1 x | Belt sander BS/E |
1 x | Centre Turning Attachment |
1 x | Aluminium Die-Cast |
1 x | Half round cutter 13mm |
1 x | ESD Brushe |
1 x | 10-piece wood router cutter set |
1 x | Blade guides separately |
1 x | Precision Vice FMZ |
1 x | MICROMOT 50/EF |
1 x | Flat nose pliers 185mm |
1 x | Slot cutter 3.2mm |
1 x | Rounding over cutter 6.4mm |
1 x | Slot cutter 5.0mm |
1 x | Gear Chuck |
1 x | V-slot cutter 6.5mm |
1 x | Professional Drill/Grinder IBS/E |
1 x | Blade for Steel and brass |
1 x | 14-piece parallel supports set |
1 x | Combination pliers 185mm |
1 x | Telephone pliers bent 205mm |
1 x | Side cutters 160mm |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Slot cutter 6.5mm |
1 x | |
1 x | Tool holder for rotary tools |
1 x | Round nose pliers 185mm |
1 x | Bench drill press TBH |
2 x | Angle cutter 45 ° |
1 x | Collet Set for accurate use on round components |
1 x | Backing disc for LWS |
1 x | Band knife of hardened spring band steel (without teeth) |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Radius Cutting Attachment, complete with pointed tool |
2 x | Bench drill machine TBM 220 |
1 x | Ball-shaped diamond coated 3.2mm |
1 x | Mill/Drill System BFW 40/E |
1 x | Diamond blade for MBS 240/E |
1 x | sanding belts for BBS/s Grit 80 |
1 x | Edge cutter with pin 6.4mm |
1 x | Multipurpose Vices Primus100 |
1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
![](images/pixel_black.gif) |
€34,519.05 |