Top » Catalog » BERNSTEIN » Cart Contents

What's In My Cart?

Product(s)

Sanding fleece for LWS Sanding fleece for LWS

   or remove
€6.09
Corundum sanding discs for LWS Corundum sanding discs for LWS

   or remove
€3.65
Long neck angle milling/drilling unit LWB 220/E Long neck angle milling/drilling unit LWB 220/E

   or remove
€102.03
Floor cover ESD Floor cover ESD

   or remove
€181.60
Crimping plier for BNC Crimping plier for BNC

   or remove
€88.50
Sanding pads for OZI 220/E grit 150 Sanding pads for OZI 220/E grit 150

   or remove
€14.62
ESD Tweezers For The SMD-Technique - 6 Piece Set ESD Tweezers For The SMD-Technique - 6 Piece Set

   or remove
€176.10
Long neck angle grinder LHW Long neck angle grinder LHW

   or remove
€96.75
CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C

   or remove
€15.30
Drill chuck with sliding sleeve for the tailstock Drill chuck with sliding sleeve for the tailstock

   or remove
€23.56
Lever Dial Indicator Lever Dial Indicator

   or remove
€223.80
Conj 5 pinças ESD Conj 5 pinças ESD

   or remove
€142.44
HSS immersion saw blades for OZI HSS immersion saw blades for OZI

   or remove
€8.53
Precision caliper square Precision caliper square

   or remove
€39.00
CRIMPING PLIERS/WIRE STRIPPER CRIMPING PLIERS/WIRE STRIPPER

   or remove
€5.95
6-piece screwdriver set ESD 6-piece screwdriver set ESD

   or remove
€85.32
Independent four jaw chuck for the DB 250 Independent four jaw chuck for the DB 250

   or remove
€26.00
Sanding pads for OZI 220/E grit 80 Sanding pads for OZI 220/E grit 80

   or remove
€14.62
Contact bracelet with spiral cord Contact bracelet with spiral cord

   or remove
€55.50
Sanding pads for OZI 220/E grit 240 Sanding pads for OZI 220/E grit 240

   or remove
€21.93
Three jaw chuck for the lathe DB 250 Three jaw chuck for the lathe DB 250

   or remove
€42.27
ROTARY COAXIAL CABLE STRIPPER 3-STEPS ROTARY COAXIAL CABLE STRIPPER 3-STEPS

   or remove
€14.30
Side cutters EUROline-Conductive Side cutters EUROline-Conductive

   or remove
€62.48
Band knife of hardened spring band steel (without teeth) Band knife of hardened spring band steel (without teeth)

   or remove
€20.70
Mini side cutters EUROline-Conductive Mini side cutters EUROline-Conductive

   or remove
€33.77
EUROline-Conductive set of pliers EUROline-Conductive set of pliers

   or remove
€390.20
Mini side cutters EUROline-Conductive Mini side cutters EUROline-Conductive

   or remove
€33.17
End side cutters 45º EUROline-Conductive End side cutters 45º EUROline-Conductive

   or remove
€70.18
Snipe nose pliers 45º EUROline-Conductive Snipe nose pliers 45º EUROline-Conductive

   or remove
€28.49
PLCC Puller PLCC Puller

   or remove
€4.51
Snipe nose pliers 45º EUROline-Conductive Snipe nose pliers 45º EUROline-Conductive

   or remove
€29.04
End side cutters EUROline-Conductive End side cutters EUROline-Conductive

   or remove
€60.06
6-piece wrench key set ESD 6-piece wrench key set ESD

   or remove
€106.80
ACCENT SERVICE TOOLS SET ACCENT SERVICE TOOLS SET

   or remove
€426.00
Mini side cutters EUROline-Conductive Mini side cutters EUROline-Conductive

   or remove
€38.83
Round nose pliers 45º EUROline-Conductive Round nose pliers 45º EUROline-Conductive

   or remove
€26.79
ESD Brushe ESD Brushe

   or remove
€16.25
Flat nose pliers 45º EUROline-Conductive Flat nose pliers 45º EUROline-Conductive

   or remove
€31.25
2-speed scroll saw DSH 2-speed scroll saw DSH

   or remove
€218.50
Belt sander BBS/S Belt sander BBS/S

   or remove
€135.00
Snipe nose pliers 45º EUROline-Conductive Snipe nose pliers 45º EUROline-Conductive

   or remove
€31.25
Scroll saw DS 230/E Scroll saw DS 230/E

   or remove
€134.00
Coarse-toothed blades (No. 1: 50 teeth per 25mm) Coarse-toothed blades (No. 1: 50 teeth per 25mm)

   or remove
€4.45
MICROMOT Mains Adapter NG 2/S MICROMOT Mains Adapter NG 2/S

   or remove
€46.34
ESD Tweezers 5-192 ESD Tweezers 5-192

   or remove
€11.40
Corundum grinding disc for LWS Corundum grinding disc for LWS

   or remove
€2.84
MICROMOT Mains Adapter NG 5/E MICROMOT Mains Adapter NG 5/E

   or remove
€112.00
6-piece set of ESD/EGB tweezers 6-piece set of ESD/EGB tweezers

   or remove
€208.90
Hot wire cutter THERMOCUT 12/E Hot wire cutter THERMOCUT 12/E

   or remove
€69.00
ESD Tweezers 5-193 ESD Tweezers 5-193

   or remove
€11.40
Earth wire Earth wire

   or remove
€12.48
6-piece socket wrenches ESD 6-piece socket wrenches ESD

   or remove
€110.50
6-piece TORX-screwdriver-set ESD 6-piece TORX-screwdriver-set ESD

   or remove
€38.12
ESD Tweezers 5-191 ESD Tweezers 5-191

   or remove
€11.40
Earthing module Earthing module

   or remove
€25.00
ESD Tweezers 5-195 ESD Tweezers 5-195

   or remove
€11.40
Earth wire with dummy Schunko-plug Earth wire with dummy Schunko-plug

   or remove
€21.20
Magnetic base Magnetic base

   or remove
€130.00
Hot wire cutter THERMOCUT 650 Hot wire cutter THERMOCUT 650

   or remove
€159.00
MICROMOT Mains Adapter NG 2/E MICROMOT Mains Adapter NG 2/E

   or remove
€53.64
6-piece screwdriver and cross-recess set ESD 6-piece screwdriver and cross-recess set ESD

   or remove
€60.62
Hot wire cutter THERMOCUT 230/E Hot wire cutter THERMOCUT 230/E

   or remove
€99.50
Earth wire Earth wire

   or remove
€11.92
Crocodile clip Crocodile clip

   or remove
€3.60
Surface planer AH 80 Surface planer AH 80

   or remove
€304.00
Complete Engraving Kit with trial glass Complete Engraving Kit with trial glass

   or remove
€39.80
PRECISION WIRE STRIPPER ESD-PLUS PRECISION WIRE STRIPPER ESD-PLUS

   or remove
€48.30
Cone shaped milling cutter Cone shaped milling cutter

   or remove
€8.94
Blade guides separately Blade guides separately

   or remove
€14.63
Tungsten carbide cutter 1.0mm Tungsten carbide cutter 1.0mm

   or remove
€7.72
Tungsten tipped saw blade Tungsten tipped saw blade

   or remove
€14.22
Ball-shaped diamond coated 3.2mm Ball-shaped diamond coated 3.2mm

   or remove
€8.12
Screwdriver 5.5 Screwdriver 5.5

   or remove
€7.80
Screwdriver 4.0 Screwdriver 4.0

   or remove
€5.00
Ball-shaped diamond coated 2.2mm Ball-shaped diamond coated 2.2mm

   or remove
€4.06
MICRO cutter MIC MICRO cutter MIC

   or remove
€71.50
Gear Chuck Gear Chuck

   or remove
€39.00
Table Saw TKS 2500 SC Table Saw TKS 2500 SC

   or remove
€2,070.00
Tungsten carbide cutter 3.0mm Tungsten carbide cutter 3.0mm

   or remove
€7.72
Set of special steel cutters Set of special steel cutters

   or remove
€7.31
Brass contact cleaner brush Brass contact cleaner brush

   or remove
€8.90
Tungsten carbide cutter 2.0mm Tungsten carbide cutter 2.0mm

   or remove
€7.72
Steady rest for D250X550 Steady rest for D250X550

   or remove
€51.50
Ball shaped milling cutters Ball shaped milling cutters

   or remove
€6.50
Motor-driven carving device MSG Motor-driven carving device MSG

   or remove
€113.00
Cylinder shaped milling cutters Cylinder shaped milling cutters

   or remove
€8.94
Diamond Grinding Bits 1mm Diamond Grinding Bits 1mm

   or remove
€3.25
HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI

   or remove
€21.90
BIT-SET BIT-SET

   or remove
€59.95
HSS immersion saw blades for OZI HSS immersion saw blades for OZI

   or remove
€8.53
Flame shaped milling cutters Flame shaped milling cutters

   or remove
€6.90
Set of precision cutters Set of precision cutters

   or remove
€5.28
Footswitch FS Footswitch FS

   or remove
€15.85
Diamond cutting blade for OZI Diamond cutting blade for OZI

   or remove
€50.00
Screwdriver 5.5 Screwdriver 5.5

   or remove
€10.90
Screwdriver 3.0 Screwdriver 3.0

   or remove
€5.00

Sub-Total: €7,542.08

Checkout

Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Service Case->
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x Sanding fleece for LWS
1 x Corundum sanding discs for LWS
1 x Long neck angle milling/drilling unit LWB 220/E
1 x Floor cover ESD
3 x Crimping plier for BNC
2 x Sanding pads for OZI 220/E grit 150
2 x ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x Long neck angle grinder LHW
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x Drill chuck with sliding sleeve for the tailstock
2 x Lever Dial Indicator
2 x Conj 5 pinças ESD
1 x HSS immersion saw blades for OZI
1 x Precision caliper square
1 x CRIMPING PLIERS/WIRE STRIPPER
3 x 6-piece screwdriver set ESD
1 x Independent four jaw chuck for the DB 250
2 x Sanding pads for OZI 220/E grit 80
2 x Contact bracelet with spiral cord
3 x Sanding pads for OZI 220/E grit 240
1 x Three jaw chuck for the lathe DB 250
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
2 x Side cutters EUROline-Conductive
1 x Band knife of hardened spring band steel (without teeth)
1 x Mini side cutters EUROline-Conductive
2 x EUROline-Conductive set of pliers
1 x Mini side cutters EUROline-Conductive
1 x End side cutters 45º EUROline-Conductive
1 x Snipe nose pliers 45º EUROline-Conductive
1 x PLCC Puller
1 x Snipe nose pliers 45º EUROline-Conductive
1 x End side cutters EUROline-Conductive
3 x 6-piece wrench key set ESD
3 x ACCENT SERVICE TOOLS SET
1 x Mini side cutters EUROline-Conductive
1 x Round nose pliers 45º EUROline-Conductive
1 x ESD Brushe
1 x Flat nose pliers 45º EUROline-Conductive
1 x 2-speed scroll saw DSH
1 x Belt sander BBS/S
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Scroll saw DS 230/E
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x MICROMOT Mains Adapter NG 2/S
1 x ESD Tweezers 5-192
1 x Corundum grinding disc for LWS
2 x MICROMOT Mains Adapter NG 5/E
2 x 6-piece set of ESD/EGB tweezers
2 x Hot wire cutter THERMOCUT 12/E
1 x ESD Tweezers 5-193
1 x Earth wire
2 x 6-piece socket wrenches ESD
1 x 6-piece TORX-screwdriver-set ESD
1 x ESD Tweezers 5-191
1 x Earthing module
1 x ESD Tweezers 5-195
1 x Earth wire with dummy Schunko-plug
2 x Magnetic base
2 x Hot wire cutter THERMOCUT 650
2 x MICROMOT Mains Adapter NG 2/E
2 x 6-piece screwdriver and cross-recess set ESD
1 x Hot wire cutter THERMOCUT 230/E
1 x Earth wire
1 x Crocodile clip
1 x Surface planer AH 80
1 x Complete Engraving Kit with trial glass
1 x PRECISION WIRE STRIPPER ESD-PLUS
1 x Cone shaped milling cutter
1 x Blade guides separately
1 x Tungsten carbide cutter 1.0mm
1 x Tungsten tipped saw blade
2 x Ball-shaped diamond coated 3.2mm
1 x Screwdriver 5.5
1 x Screwdriver 4.0
1 x Ball-shaped diamond coated 2.2mm
1 x MICRO cutter MIC
1 x Gear Chuck
1 x Table Saw TKS 2500 SC
1 x Tungsten carbide cutter 3.0mm
1 x Set of special steel cutters
1 x Brass contact cleaner brush
1 x Tungsten carbide cutter 2.0mm
1 x Steady rest for D250X550
1 x Ball shaped milling cutters
1 x Motor-driven carving device MSG
1 x Cylinder shaped milling cutters
1 x Diamond Grinding Bits 1mm
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x BIT-SET
1 x HSS immersion saw blades for OZI
1 x Flame shaped milling cutters
1 x Set of precision cutters
1 x Footswitch FS
1 x Diamond cutting blade for OZI
1 x Screwdriver 5.5
1 x Screwdriver 3.0
€7,542.08
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
What's New?
Diamond-coated cutting and roughing disc
Diamond-coated cutting and roughing disc
€22.90
Languages
Portugues English

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online