Top » Catalog » Cart Contents

What's In My Cart?

Product(s)

Earthing module Earthing module

   or remove
€25.00
Boring Bar for CCMT 8mm Boring Bar for CCMT 8mm

   or remove
€29.50
Table Sawr TKS 315 E Table Sawr TKS 315 E

   or remove
€375.00
Mini side cutters EUROline-Conductive Mini side cutters EUROline-Conductive

   or remove
€66.34
14-piece parallel supports set 14-piece parallel supports set

   or remove
€91.86
High quality corundum grinding bits High quality corundum grinding bits

   or remove
€2.43
Four Jaw Chuck Four Jaw Chuck

   or remove
€189.90
MICRO Screwdriver MIS 1. Complete with 16 inserts. MICRO Screwdriver MIS 1. Complete with 16 inserts.

   or remove
€73.98
Three-jaw steel drill chuck Three-jaw steel drill chuck

   or remove
€5.28
Tool holder for rotary tools Tool holder for rotary tools

   or remove
€14.40
Flexishaft MICROMOT 110/BF Flexishaft MICROMOT 110/BF

   or remove
€26.82
Precision Drill/Grinder FBS 240/E Precision Drill/Grinder FBS 240/E

   or remove
€60.97
TIP SPT-9 TIP SPT-9

   or remove
€9.30
EUROline mini side cutter EUROline mini side cutter

   or remove
€38.12
Compact workshop vacuum cleaner CW-matic Compact workshop vacuum cleaner CW-matic

   or remove
€172.75
Super-Cut Super-Cut

   or remove
€13.41
Set of precision cutters Set of precision cutters

   or remove
€5.28
Disc cutters Disc cutters

   or remove
€9.75
Side cutters 160mm Side cutters 160mm

   or remove
€15.13
Socket Wrenches 4.5 Socket Wrenches 4.5

   or remove
€8.50
Long neck angle milling/drilling unit LWB 220/E Long neck angle milling/drilling unit LWB 220/E

   or remove
€102.03
Coarse-toothed blades (No. 3: 34 teeth per 25mm) Coarse-toothed blades (No. 3: 34 teeth per 25mm)

   or remove
€3.65
Cylinder shaped milling cutters Cylinder shaped milling cutters

   or remove
€8.94
Motor-driven carving device MSG Motor-driven carving device MSG

   or remove
€113.00
Diamond Cutting Discs Diamond Cutting Discs

   or remove
€8.94
MICRO Heat gun MH 550 MICRO Heat gun MH 550

   or remove
€35.77
lathe tools 10mm lathe tools 10mm

   or remove
€95.00
quantum revolving center CM2 quantum revolving center CM2

   or remove
€55.00
Snipe nose pliers 45º EUROline-Conductive Snipe nose pliers 45º EUROline-Conductive

   or remove
€31.25
MICROMOT 230/E MICROMOT 230/E

   or remove
€65.44
TIP SPT-6 TIP SPT-6

   or remove
€18.60
Mill/Drill System BFW 40/E Mill/Drill System BFW 40/E

   or remove
€176.82
Mini side cutters EUROline-Conductive Mini side cutters EUROline-Conductive

   or remove
€33.77
TIP SPT-2 TIP SPT-2

   or remove
€18.60
High quality corundum grinding bits High quality corundum grinding bits

   or remove
€2.03
Wolfram vanadium steel milling bits Wolfram vanadium steel milling bits

   or remove
€6.09
Hot wire cutter THERMOCUT 230/E Hot wire cutter THERMOCUT 230/E

   or remove
€199.00
Boring Bar for CCMT Boring Bar for CCMT

   or remove
€29.50
Diamond Grinding Bits 1mm Diamond Grinding Bits 1mm

   or remove
€3.25
Fixed Steady Fixed Steady

   or remove
€55.60
End side cutters EUROline-Conductive End side cutters EUROline-Conductive

   or remove
€120.12
Ball-shaped diamond coated 2.2mm Ball-shaped diamond coated 2.2mm

   or remove
€4.06
Scroll saw DS 230/E Scroll saw DS 230/E

   or remove
€134.00
Coarse-toothed (18 TPI per 25mm) Coarse-toothed (18 TPI per 25mm)

   or remove
€5.28
Radius Cutting Attachment, complete with pointed tool Radius Cutting Attachment, complete with pointed tool

   or remove
€61.36
MICRO Band Saw MBS 240/E MICRO Band Saw MBS 240/E

   or remove
€315.00
Side cutters 180mm Side cutters 180mm

   or remove
€16.78
Tungsten carbide cutters set Tungsten carbide cutters set

   or remove
€21.95
Hot wire cutter THERMOCUT 12/E Hot wire cutter THERMOCUT 12/E

   or remove
€34.50
Ceramic-tipped tweezers and ESD 5-096 Ceramic-tipped tweezers and ESD 5-096

   or remove
€40.30
MICROMOT 50/E MICROMOT 50/E

   or remove
€30.89
MICRO Miller FF 230 MICRO Miller FF 230

   or remove
€817.07
Set of special steel cutters Set of special steel cutters

   or remove
€7.31
Fine dust paper filter for CW-matic Fine dust paper filter for CW-matic

   or remove
€10.56
MICRO woodturning lathe DB 250 MICRO woodturning lathe DB 250

   or remove
€154.06
3-jaw chuck centrically clamping 125mm 3-jaw chuck centrically clamping 125mm

   or remove
€126.50
Protective device for hand-operated MICROMOT Protective device for hand-operated MICROMOT

   or remove
€4.87
TIP SPT-3 TIP SPT-3

   or remove
€9.30
6-piece screwdriver and cross-recess set ESD 6-piece screwdriver and cross-recess set ESD

   or remove
€30.31
MICRO Miller FF 500 MICRO Miller FF 500

   or remove
€1,820.73
Coarse-toothed blades (No. 9: 14 teeth per 25mm) Coarse-toothed blades (No. 9: 14 teeth per 25mm)

   or remove
€3.65
ESD Tweezers 5-195 ESD Tweezers 5-195

   or remove
€11.40
Self-adhesive white corundum sanding discs for TG 125/E Self-adhesive white corundum sanding discs for TG 125/E

   or remove
€8.13
Coarse-toothed blades (No. 3: 41 teeth per 25mm) Coarse-toothed blades (No. 3: 41 teeth per 25mm)

   or remove
€4.45
CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C

   or remove
€15.30
machine base with shelves for D250X550 machine base with shelves for D250X550

   or remove
€331.60
sclcr2525M12 sclcr2525M12

   or remove
€44.63
Tungsten carbide cutter 2.0mm Tungsten carbide cutter 2.0mm

   or remove
€7.72
MICROMOT Mains Adapter NG 2/E MICROMOT Mains Adapter NG 2/E

   or remove
€26.82
EPROM/Flash-PLCC32-2-DIL32 socket submodule EPROM/Flash-PLCC32-2-DIL32 socket submodule

   or remove
€113.50
Lathe chuck flange for D250X550 Lathe chuck flange for D250X550

   or remove
€79.00
Hot wire cutter THERMOCUT 650 Hot wire cutter THERMOCUT 650

   or remove
€79.50
EUROline-Conductive set of pliers EUROline-Conductive set of pliers

   or remove
€195.10
Tungsten carbide cutter 3.0mm Tungsten carbide cutter 3.0mm

   or remove
€7.72
Tool holder type D for SWH 1-A Tool holder type D for SWH 1-A

   or remove
€83.00
BeeProg2 BeeProg2

   or remove
€999.00
TIP SPT-4 TIP SPT-4

   or remove
€9.30
Footswitch FS Footswitch FS

   or remove
€15.85
Morse taper MT2 - B16 Morse taper MT2 - B16

   or remove
€7.50
Parting tool 10mm Parting tool 10mm

   or remove
€78.00

Sub-Total: €8,182.12

Checkout

Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x Earthing module
1 x Boring Bar for CCMT 8mm
1 x Table Sawr TKS 315 E
2 x Mini side cutters EUROline-Conductive
1 x 14-piece parallel supports set
1 x High quality corundum grinding bits
1 x Four Jaw Chuck
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x Three-jaw steel drill chuck
1 x Tool holder for rotary tools
1 x Flexishaft MICROMOT 110/BF
1 x Precision Drill/Grinder FBS 240/E
1 x TIP SPT-9
1 x EUROline mini side cutter
1 x Compact workshop vacuum cleaner CW-matic
1 x Super-Cut
1 x Set of precision cutters
1 x Disc cutters
1 x Side cutters 160mm
1 x Socket Wrenches 4.5
1 x Long neck angle milling/drilling unit LWB 220/E
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Cylinder shaped milling cutters
1 x Motor-driven carving device MSG
1 x Diamond Cutting Discs
1 x MICRO Heat gun MH 550
1 x lathe tools 10mm
1 x quantum revolving center CM2
1 x Snipe nose pliers 45º EUROline-Conductive
1 x MICROMOT 230/E
2 x TIP SPT-6
1 x Mill/Drill System BFW 40/E
1 x Mini side cutters EUROline-Conductive
2 x TIP SPT-2
1 x High quality corundum grinding bits
1 x Wolfram vanadium steel milling bits
2 x Hot wire cutter THERMOCUT 230/E
1 x Boring Bar for CCMT
1 x Diamond Grinding Bits 1mm
1 x Fixed Steady
2 x End side cutters EUROline-Conductive
1 x Ball-shaped diamond coated 2.2mm
1 x Scroll saw DS 230/E
1 x Coarse-toothed (18 TPI per 25mm)
1 x Radius Cutting Attachment, complete with pointed tool
1 x MICRO Band Saw MBS 240/E
1 x Side cutters 180mm
1 x Tungsten carbide cutters set
1 x Hot wire cutter THERMOCUT 12/E
1 x Ceramic-tipped tweezers and ESD 5-096
1 x MICROMOT 50/E
1 x MICRO Miller FF 230
1 x Set of special steel cutters
1 x Fine dust paper filter for CW-matic
1 x MICRO woodturning lathe DB 250
1 x 3-jaw chuck centrically clamping 125mm
1 x Protective device for hand-operated MICROMOT
1 x TIP SPT-3
1 x 6-piece screwdriver and cross-recess set ESD
1 x MICRO Miller FF 500
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x ESD Tweezers 5-195
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x machine base with shelves for D250X550
1 x sclcr2525M12
1 x Tungsten carbide cutter 2.0mm
1 x MICROMOT Mains Adapter NG 2/E
1 x EPROM/Flash-PLCC32-2-DIL32 socket submodule
1 x Lathe chuck flange for D250X550
1 x Hot wire cutter THERMOCUT 650
1 x EUROline-Conductive set of pliers
1 x Tungsten carbide cutter 3.0mm
1 x Tool holder type D for SWH 1-A
1 x BeeProg2
1 x TIP SPT-4
1 x Footswitch FS
1 x Morse taper MT2 - B16
1 x Parting tool 10mm
€8,182.12
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
What's New?
Grinding mop cylinder grit 240
Grinding mop cylinder grit 240
€8.33
Languages
Portugues English

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online