Top » Catalog » Cart Contents

What's In My Cart?

Product(s)

Broca de alta duração de 2.1mm Broca de alta duração de 2.1mm

   or remove
€4.99
Replacement cutting disc for MICRO cutter MIC Replacement cutting disc for MICRO cutter MIC

   or remove
€7.72
Hot wire cutter THERMOCUT 230/E Hot wire cutter THERMOCUT 230/E

   or remove
€99.50
Diamond-coated cutting disc for MIC Diamond-coated cutting disc for MIC

   or remove
€12.19
6-piece screwdriver and cross-recess set 6-piece screwdriver and cross-recess set

   or remove
€29.87
Polishing Set Polishing Set

   or remove
€21.13
Super-fine sanding discs grain 000 Super-fine sanding discs grain 000

   or remove
€3.82
Blade holders for DS 460 Blade holders for DS 460

   or remove
€14.20
Hot wire cutter THERMOCUT 12/E Hot wire cutter THERMOCUT 12/E

   or remove
€34.50
Three jaw chuck for the lathe DB 250 Three jaw chuck for the lathe DB 250

   or remove
€42.27
Gear Chuck Gear Chuck

   or remove
€39.00
Professional set for finish grinding and polishing Professional set for finish grinding and polishing

   or remove
€27.56
TU 2004V TU 2004V

   or remove
€1,400.00
Cylinder sander WAS/E Cylinder sander WAS/E

   or remove
€119.92
Special Fused Alumina (Hardness N). Special Fused Alumina (Hardness N).

   or remove
€3.25
Drill chuck with sliding sleeve for the tailstock Drill chuck with sliding sleeve for the tailstock

   or remove
€11.78
Grinding mop cylinder grit 120 Grinding mop cylinder grit 120

   or remove
€8.33
Replacement carving blades for MSG Replacement carving blades for MSG

   or remove
€31.70
Coarse-toothed (10 TPI per 25mm) Coarse-toothed (10 TPI per 25mm)

   or remove
€5.28
Four Jaw Chuck Four Jaw Chuck

   or remove
€189.90
Micro Compound Table KT 70 Micro Compound Table KT 70

   or remove
€77.64
Independent four jaw chuck for the DB 250 Independent four jaw chuck for the DB 250

   or remove
€26.00
CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C

   or remove
€15.30
Coarse-toothed blades (No. 3: 34 teeth per 25mm) Coarse-toothed blades (No. 3: 34 teeth per 25mm)

   or remove
€3.65
Grinding mop cylinder grit 120 Grinding mop cylinder grit 120

   or remove
€8.33
Broca de alta duração de 3.0mm Broca de alta duração de 3.0mm

   or remove
€4.99
Collet Set for accurate use on round components Collet Set for accurate use on round components

   or remove
€228.80
Coarse-toothed (18 TPI per 25mm) Coarse-toothed (18 TPI per 25mm)

   or remove
€5.28
Five piece HSS chisel set Five piece HSS chisel set

   or remove
€33.73
6pcs Double Open End wrench set 6pcs Double Open End wrench set

   or remove
€49.30
Broca de alta duração de 2.3mm Broca de alta duração de 2.3mm

   or remove
€4.99
Coarse-toothed (25 TPI per 25mm) Coarse-toothed (25 TPI per 25mm)

   or remove
€5.28

Sub-Total: €2,570.20

Checkout

Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x Broca de alta duração de 2.1mm
1 x Replacement cutting disc for MICRO cutter MIC
1 x Hot wire cutter THERMOCUT 230/E
1 x Diamond-coated cutting disc for MIC
1 x 6-piece screwdriver and cross-recess set
1 x Polishing Set
1 x Super-fine sanding discs grain 000
1 x Blade holders for DS 460
1 x Hot wire cutter THERMOCUT 12/E
1 x Three jaw chuck for the lathe DB 250
1 x Gear Chuck
1 x Professional set for finish grinding and polishing
1 x TU 2004V
1 x Cylinder sander WAS/E
1 x Special Fused Alumina (Hardness N).
1 x Drill chuck with sliding sleeve for the tailstock
1 x Grinding mop cylinder grit 120
1 x Replacement carving blades for MSG
1 x Coarse-toothed (10 TPI per 25mm)
1 x Four Jaw Chuck
1 x Micro Compound Table KT 70
1 x Independent four jaw chuck for the DB 250
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Grinding mop cylinder grit 120
1 x Broca de alta duração de 3.0mm
1 x Collet Set for accurate use on round components
1 x Coarse-toothed (18 TPI per 25mm)
1 x Five piece HSS chisel set
1 x 6pcs Double Open End wrench set
1 x Broca de alta duração de 2.3mm
1 x Coarse-toothed (25 TPI per 25mm)
€2,570.20
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
What's New?
Super-fine sanding discs grain 000
Super-fine sanding discs grain 000
€3.82
Languages
Portugues English

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online