Top » Catalog » Cart Contents

What's In My Cart?

Product(s)

Lambswool polishing disc Lambswool polishing disc

   or remove
€6.09
Professional polishing sponge Professional polishing sponge

   or remove
€6.42
Tungsten Carbide Tipped (TCT) Tungsten Carbide Tipped (TCT)

   or remove
€42.26
Professional set for finish grinding and polishing Professional set for finish grinding and polishing

   or remove
€27.56
Polishing felt, medium hard Polishing felt, medium hard

   or remove
€5.69
sanding belts for BBS/s Grit 240 sanding belts for BBS/s Grit 240

   or remove
€6.09
Super-fine sanding discs grain 2000 Super-fine sanding discs grain 2000

   or remove
€3.82
sandpaper for PS 13 Grot 180 sandpaper for PS 13 Grot 180

   or remove
€5.28
sanding belts for BBS/s Grit 150 sanding belts for BBS/s Grit 150

   or remove
€6.09
MICROMOT drill stand MB 200 MICROMOT drill stand MB 200

   or remove
€71.54
Mill/Drill Unit BFB 2000. Mill/Drill Unit BFB 2000.

   or remove
€172.76
Corundum fan sander for LWS Corundum fan sander for LWS

   or remove
€4.45
Corundum grinding disc for LWS Corundum grinding disc for LWS

   or remove
€2.84
Mini side cutters EUROline-Conductive Mini side cutters EUROline-Conductive

   or remove
€38.83
Rasp plate with metal burrs made from wolfram carbide for LWS Rasp plate with metal burrs made from wolfram carbide for LWS

   or remove
€32.90
Mini side cutters EUROline-Conductive Mini side cutters EUROline-Conductive

   or remove
€33.77
Insulation Resistance Tester MG500 Insulation Resistance Tester MG500

   or remove
€590.00
Protective device for hand-operated MICROMOT Protective device for hand-operated MICROMOT

   or remove
€4.87
Footswitch FS Footswitch FS

   or remove
€31.70
Corundum bound cutting disc for LWS Corundum bound cutting disc for LWS

   or remove
€5.28
MICROMOT extension cord. 300cm. MICROMOT extension cord. 300cm.

   or remove
€6.50
End side cutters EUROline-Conductive End side cutters EUROline-Conductive

   or remove
€60.06
Mini side cutters EUROline-Conductive Mini side cutters EUROline-Conductive

   or remove
€33.17
CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C

   or remove
€15.30
replacement glass fibre for 2-166 Ø 4mm (PU 10) replacement glass fibre for 2-166 Ø 4mm (PU 10)

   or remove
€6.30
14-piece parallel supports set 14-piece parallel supports set

   or remove
€91.86
Three jaw chuck for the lathe DB 250 Three jaw chuck for the lathe DB 250

   or remove
€42.27
Five piece HSS chisel set Five piece HSS chisel set

   or remove
€33.73
MICROMOT steel collet set MICROMOT steel collet set

   or remove
€8.53
Aluminium Die-Cast Aluminium Die-Cast

   or remove
€176.80
Corundum grinding disc for LWS Corundum grinding disc for LWS

   or remove
€2.84
CRIMPING PLIERS/WIRE STRIPPER CRIMPING PLIERS/WIRE STRIPPER

   or remove
€5.95
Dividing attachment TA 230 for PF 250 Dividing attachment TA 230 for PF 250

   or remove
€195.53
Three-jaw steel drill chuck Three-jaw steel drill chuck

   or remove
€5.28
Independent four jaw chuck for the DB 250 Independent four jaw chuck for the DB 250

   or remove
€26.00
Insulation Resistance Tester MG125 Insulation Resistance Tester MG125

   or remove
€295.00
Side cutters EUROline-Conductive Side cutters EUROline-Conductive

   or remove
€31.24
Corundum fan sander for LWS Corundum fan sander for LWS

   or remove
€4.45
Corundum sanding discs for LWS Corundum sanding discs for LWS

   or remove
€3.65
Flexishaft MICROMOT 110/BF Flexishaft MICROMOT 110/BF

   or remove
€26.82
Corundum sanding discs for LWS Corundum sanding discs for LWS

   or remove
€3.65
Multiform grindstone Multiform grindstone

   or remove
€10.56
MICROMOT tool holder MICROMOT tool holder

   or remove
€6.09
Drill chuck with sliding sleeve for the tailstock Drill chuck with sliding sleeve for the tailstock

   or remove
€11.78
Backing disc for LWS Backing disc for LWS

   or remove
€4.06
Sanding fleece for LWS Sanding fleece for LWS

   or remove
€6.09
Replacement carving blades for MSG Replacement carving blades for MSG

   or remove
€31.70
Flexishaft MICROMOT 110/P Flexishaft MICROMOT 110/P

   or remove
€28.04
End side cutters 45º EUROline-Conductive End side cutters 45º EUROline-Conductive

   or remove
€70.18
Sanding fleece for LWS Sanding fleece for LWS

   or remove
€6.09
Diamond-coated cutting and roughing disc Diamond-coated cutting and roughing disc

   or remove
€22.90
Micro Compound Table KT 70 Micro Compound Table KT 70

   or remove
€77.64
Sanding pads for OZI 220/E grit 80 Sanding pads for OZI 220/E grit 80

   or remove
€7.31
Coarse-toothed blades (No. 1: 50 teeth per 25mm) Coarse-toothed blades (No. 1: 50 teeth per 25mm)

   or remove
€4.45
Coarse-toothed blades (No. 5: 17 teeth per 25mm) Coarse-toothed blades (No. 5: 17 teeth per 25mm)

   or remove
€3.65
Coarse-toothed blades (No. 3: 34 teeth per 25mm) Coarse-toothed blades (No. 3: 34 teeth per 25mm)

   or remove
€3.65
Diamond cutting blade for OZI Diamond cutting blade for OZI

   or remove
€50.00
V-slot cutter 6.5mm V-slot cutter 6.5mm

   or remove
€4.06
Replacement cutting disc for MICRO cutter MIC Replacement cutting disc for MICRO cutter MIC

   or remove
€7.72
HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI

   or remove
€21.90
Spare cutting wire Spare cutting wire

   or remove
€7.31
Rebating cutter 6.4mm Rebating cutter 6.4mm

   or remove
€4.06
Coarse-toothed blades (No. 3: 41 teeth per 25mm) Coarse-toothed blades (No. 3: 41 teeth per 25mm)

   or remove
€4.45
Edge cutter with pin 6.4mm Edge cutter with pin 6.4mm

   or remove
€4.06
Multipurpose Vices Primus100 Multipurpose Vices Primus100

   or remove
€63.41
Crosscut 'Super-Cut' blade Crosscut 'Super-Cut' blade

   or remove
€9.75
Silicon-Carbide. Silicon-Carbide.

   or remove
€3.25
Replacement glue sticks for HKP 220 Replacement glue sticks for HKP 220

   or remove
€1.63
Slot cutter 5.0mm Slot cutter 5.0mm

   or remove
€4.06
10-piece wood router cutter set 10-piece wood router cutter set

   or remove
€28.00
Polishing Set Polishing Set

   or remove
€21.13
Blade for Steel and brass Blade for Steel and brass

   or remove
€13.00
Half round cutter 13mm Half round cutter 13mm

   or remove
€4.06
Precision Vice FMS 75 Precision Vice FMS 75

   or remove
€27.64
Diamond blade for MBS 240/E Diamond blade for MBS 240/E

   or remove
€91.05
Special Fused Alumina (Hardness N). Special Fused Alumina (Hardness N).

   or remove
€3.25
HSS cutting blade for OZI HSS cutting blade for OZI

   or remove
€17.00
HSS immersion saw blades for OZI HSS immersion saw blades for OZI

   or remove
€8.53
Angle cutter 45 ° Angle cutter 45 °

   or remove
€4.06
Precision steel vice PM 40 Precision steel vice PM 40

   or remove
€41.86
Super-Cut Super-Cut

   or remove
€13.41
Combi cutter 6.5/2.5mm Combi cutter 6.5/2.5mm

   or remove
€4.06
Blade for Wood and Plastics Blade for Wood and Plastics

   or remove
€13.00

Sub-Total: €2,943.07

Checkout

Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Service Case->
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x Lambswool polishing disc
1 x Professional polishing sponge
2 x Tungsten Carbide Tipped (TCT)
1 x Professional set for finish grinding and polishing
1 x Polishing felt, medium hard
1 x sanding belts for BBS/s Grit 240
1 x Super-fine sanding discs grain 2000
1 x sandpaper for PS 13 Grot 180
1 x sanding belts for BBS/s Grit 150
1 x MICROMOT drill stand MB 200
1 x Mill/Drill Unit BFB 2000.
1 x Corundum fan sander for LWS
1 x Corundum grinding disc for LWS
1 x Mini side cutters EUROline-Conductive
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Mini side cutters EUROline-Conductive
2 x Insulation Resistance Tester MG500
1 x Protective device for hand-operated MICROMOT
2 x Footswitch FS
1 x Corundum bound cutting disc for LWS
1 x MICROMOT extension cord. 300cm.
1 x End side cutters EUROline-Conductive
1 x Mini side cutters EUROline-Conductive
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x 14-piece parallel supports set
1 x Three jaw chuck for the lathe DB 250
1 x Five piece HSS chisel set
1 x MICROMOT steel collet set
1 x Aluminium Die-Cast
1 x Corundum grinding disc for LWS
1 x CRIMPING PLIERS/WIRE STRIPPER
1 x Dividing attachment TA 230 for PF 250
1 x Three-jaw steel drill chuck
1 x Independent four jaw chuck for the DB 250
1 x Insulation Resistance Tester MG125
1 x Side cutters EUROline-Conductive
1 x Corundum fan sander for LWS
1 x Corundum sanding discs for LWS
1 x Flexishaft MICROMOT 110/BF
1 x Corundum sanding discs for LWS
1 x Multiform grindstone
1 x MICROMOT tool holder
1 x Drill chuck with sliding sleeve for the tailstock
1 x Backing disc for LWS
1 x Sanding fleece for LWS
1 x Replacement carving blades for MSG
1 x Flexishaft MICROMOT 110/P
1 x End side cutters 45º EUROline-Conductive
1 x Sanding fleece for LWS
1 x Diamond-coated cutting and roughing disc
1 x Micro Compound Table KT 70
1 x Sanding pads for OZI 220/E grit 80
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Diamond cutting blade for OZI
1 x V-slot cutter 6.5mm
1 x Replacement cutting disc for MICRO cutter MIC
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Spare cutting wire
1 x Rebating cutter 6.4mm
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Edge cutter with pin 6.4mm
1 x Multipurpose Vices Primus100
1 x Crosscut 'Super-Cut' blade
1 x Silicon-Carbide.
1 x Replacement glue sticks for HKP 220
1 x Slot cutter 5.0mm
1 x 10-piece wood router cutter set
1 x Polishing Set
1 x Blade for Steel and brass
1 x Half round cutter 13mm
1 x Precision Vice FMS 75
1 x Diamond blade for MBS 240/E
1 x Special Fused Alumina (Hardness N).
1 x HSS cutting blade for OZI
1 x HSS immersion saw blades for OZI
1 x Angle cutter 45 °
1 x Precision steel vice PM 40
1 x Super-Cut
1 x Combi cutter 6.5/2.5mm
1 x Blade for Wood and Plastics
€2,943.07
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
What's New?
Corundum fan sander for LWS
Corundum fan sander for LWS
€4.45
Languages
Portugues English

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online